Good Day, I've riding with a HD drag bar on my 48, I totally love the looks, but my back is killing me, so I'm thinking about getting an 8" Z bar, I like the Lick's 90 degree angle style ( I don't like the curved or Z style), any ones have these bars installed, can you post pictures. besides Lick's are there any other brands recommended? should I get the one with indent/dimpled? can I use the same cables? if not where can I get these cables? or should I just bring it to the shop and have them worry about the cables and installation?

I am a newbie, so I have a lot of questions, thank you very much for your sharing. Have a good one everyone.

This is how my 48 looks now:
http://i111.photobucket.com/albums/n...o/e3ce5368.jpg

 

8" narrow / slightly pinched Z bars, which I can sell you w/ pre internal wired / chromed.

 

Slightly pinched? can you post picture, or email it to whiteteeshirt@yahoo.com

 

no prob man. they are called CAPITAL Z Bars, by No school choppers:

and here are the pics. they are the exact specs you posted, but slightly narrower than the licks. which looks better IMO.

 

mine are 10" Z bars from Licks. I love them! I would recommend getting a new brake cable from Magnum Shielding. They have a "build your own" steal braided kit for $55. It comes in a 6ft line that you will cut down to about 32". I used 90 degree banjo bolts. You can use the stock throttle and clutch cables.

 

+1 on Magnum for your brake line. I replaced my stock bars on '09 Iron with R6C 8" Z bars and Magnum brake line.

 

hey i want this bar plz contact me on shb_2005@hotmail.com

 

i put 8" mini apes on my 48 and used all of the same cables. had to slightly adjust my front brake line but everything worked fine

 

Gotta fix my cable length I said. It is more like 43" not 32" like I said in my earlier post.

 

I am also making the change from drag bars to 10inch Z bars !! Can't wait ... Thanks for the info on the break line sounds like a good kit