RSD 12" apes
#11
#12
#13
That Sporty in that video looks hideous. The geometry will be awful going down the road. Geez all that crap on that bike, and a stock seat. That was the first thing I changed even before I rode it home.
Im a rider, I build everything with ridability in mind. Thats why Im anti-ape bars. They arent good for cornering and sudden haphazard maneuvers. . Yeah they look really cool.
Drummer. It will be this winter sometime. Im having too much fun riding right now to take it down
BTW you are lower your head to see the speed, on the side you not have to move your head as far. When you get used to it, it is faster than the center spot. I know a few guys here who have gone a cheaper do it yourself bracket.
This is the non "C" way. BTW if you can find someone that has done this and get there stock parts, you can keep your center spot, just move it above and between the handlebars.
https://www.hdforums.com/forum/sport...y-version.html
Im a rider, I build everything with ridability in mind. Thats why Im anti-ape bars. They arent good for cornering and sudden haphazard maneuvers. . Yeah they look really cool.
Drummer. It will be this winter sometime. Im having too much fun riding right now to take it down
BTW you are lower your head to see the speed, on the side you not have to move your head as far. When you get used to it, it is faster than the center spot. I know a few guys here who have gone a cheaper do it yourself bracket.
This is the non "C" way. BTW if you can find someone that has done this and get there stock parts, you can keep your center spot, just move it above and between the handlebars.
https://www.hdforums.com/forum/sport...y-version.html
Last edited by DeD Fred; 08-20-2011 at 12:09 PM.
#14
#16
If I may, the installation of the bars, swapping of the risers and relocation of the speedo is not hard. You just need to get the right parts and tools, and you're good to go.
A month or so ago I put 12" apes on my 883C. Had to remove the stock risers and speedo mount, extend the wires. I moved the speedo to the side of the tank with the autometer clamp that costed me $15. I bought risers for $30 from Drag Specialties, and the cable kit from Burly for $200 and so bucks.
PM if you need some help!
A month or so ago I put 12" apes on my 883C. Had to remove the stock risers and speedo mount, extend the wires. I moved the speedo to the side of the tank with the autometer clamp that costed me $15. I bought risers for $30 from Drag Specialties, and the cable kit from Burly for $200 and so bucks.
PM if you need some help!
#17
I like the way these bars look!
It would be a treat to see pictures with these handlebars on a Sportster.
Information or tips about your installation would be helpful too.
I'm seriously thinking about putting these on my 1200c (pictured below)
Thanks for your participation.
It would be a treat to see pictures with these handlebars on a Sportster.
Information or tips about your installation would be helpful too.
I'm seriously thinking about putting these on my 1200c (pictured below)
Thanks for your participation.
#18
You can do it with the stock custom pullback riser but it will look terrible IMO. I put mini apes on my custom and I went with a nightster riser. Now I seriously regret not taking the speedo off the bars completely. Looks so much cleaner. Apes on a pullback riser look really weird.
agreed, its honestly my least favorite part of my bike. When i bought the bike, i knew somewhere down the line id be replacing the riser assembly. I put a licks super bar on it, doesnt look bad, but im swapping mine out for an 8' t bar
#19
Thread
Thread Starter
Forum
Replies
Last Post