I know the shop had to have them made through someone else. Not too sure where though. Sorry. The price of it all was included in the price of the bike so I don't really have a breakdown of what everything cost.
Making a set of clip-on's is pretty easy. Get some pipe that has the right inner diameter to slide over the fork tubes and cut two pieces of it about 1-1/2" in length. Slice it length wise and weld a couple pieces on either side of the cut for a clamping bolt. Drill a couple holes for the bolt and nut, then just take a couple lengths of 1" OD pipe for the bar portion and weld them onto the other piece. Made a few sets of these and they cost damn near nuthin. I looked but have no pics. Sorry.
I guess they ain't as fancy as the RSD ones but I'm a cheap bastard.
sorry the pictures are out of order, but here was the during pictures. I was only slightly disappointed that there was nothing included in the gauge relocation kit to cover those ugly *** holes where the previous mount bolts went through.