Last edit by: IB Advertising
DIY - Air Cleaner
• Step by Step Instructions
• Parts Needs
• Visual Guide
Read full discussion below
• Step by Step Instructions
• Parts Needs
• Visual Guide
Read full discussion below
Small, cheap & easy do it yourself air cleaner (lots of pics)
#602
Just finaly got round to finishing this mod, not fitted yet though.
One thing that concerns me now is I just read this on the other place.
http://xlforum.net/vbportal/forums/s....php?t=1208630
Dan stating it would be to restrictive ! any thoughts.
Jak...
One thing that concerns me now is I just read this on the other place.
http://xlforum.net/vbportal/forums/s....php?t=1208630
Dan stating it would be to restrictive ! any thoughts.
Jak...
#603
Just finaly got round to finishing this mod, not fitted yet though.
One thing that concerns me now is I just read this on the other place.
http://xlforum.net/vbportal/forums/s....php?t=1208630
Dan stating it would be to restrictive ! any thoughts.
Jak...
One thing that concerns me now is I just read this on the other place.
http://xlforum.net/vbportal/forums/s....php?t=1208630
Dan stating it would be to restrictive ! any thoughts.
Jak...
The stock a/c on a EFI Sportster is closed on all sides and only has a 1"-2" opening to suck in air. I would think ANYTHING that is open 360* around would flow better than that.
Also, isn't the air cleaner mentioned in that thread made for a car with say a 2bbl or 4bbl carb.
A better filter MAY improve performance but IMO I can't see it being restrictive.
If I misunderstood the original point on this I apologize in advance.
#604
I found this link in another thread linked from here. Anybody know the exact size of breather bolt a 07+ sportster would use?
http://www.mcmaster.com/#catalog/117/349/=nek3x2
These are significantly cheaper than DK or anybody else.
http://www.mcmaster.com/#catalog/117/349/=nek3x2
These are significantly cheaper than DK or anybody else.
#605
I found this link in another thread linked from here. Anybody know the exact size of breather bolt a 07+ sportster would use?
http://www.mcmaster.com/#catalog/117/349/=nek3x2
These are significantly cheaper than DK or anybody else.
http://www.mcmaster.com/#catalog/117/349/=nek3x2
These are significantly cheaper than DK or anybody else.
I bought several brass bolts from McMaster and machined them to use with a breather bracket that breathes back into the carb and mounted a K&N 56-1400 AC assembly for about 56 bucks from AutoZone. Cheap and looks killer.
Last edited by motohaid; 06-29-2013 at 11:39 AM.
#606
I would like to know how it would be restrictive too.
The stock a/c on a EFI Sportster is closed on all sides and only has a 1"-2" opening to suck in air. I would think ANYTHING that is open 360* around would flow better than that.
Also, isn't the air cleaner mentioned in that thread made for a car with say a 2bbl or 4bbl carb.
A better filter MAY improve performance but IMO I can't see it being restrictive.
If I misunderstood the original point on this I apologize in advance.
The stock a/c on a EFI Sportster is closed on all sides and only has a 1"-2" opening to suck in air. I would think ANYTHING that is open 360* around would flow better than that.
Also, isn't the air cleaner mentioned in that thread made for a car with say a 2bbl or 4bbl carb.
A better filter MAY improve performance but IMO I can't see it being restrictive.
If I misunderstood the original point on this I apologize in advance.
#607
I have had the mreed conversion filter for about a year with 2 1/4" Sampson drag pipes and lollypops, bike accelerates and top ends like its *** is on fire, much better than stock. No flat spots due to the lollypops. Had to increase jetting to stop farting through carb. I ran my crank breathers to the ground, no 20-50 synthetic going into my top end! Or on my bike.
Last edited by misput; 06-29-2013 at 07:20 PM.
#608
nightster air cleaner mreed mod
Mreed rocks had this done in no time and breather bolts are from "meadowsmoto" on ebay check them out. I had stage 1 air cleaner on before with the adequate download from the stealers and it seems to run just as good, if not better. I think I will attemp a tune myself with the se super tuner once i have the computer cables. ..09 nightster..
#610
Don't regret it too much.
K&N Filter = $50
Breather bolts = $35
Bracket = $30
Autozone Kit = $15.
You're at $130 if you were to do the home made kit with the same components and you've got to put in atleast an hour of elbow grease. You spent an extra $50 bucks for a reputable air cleaner kit that took minutes to install.
K&N Filter = $50
Breather bolts = $35
Bracket = $30
Autozone Kit = $15.
You're at $130 if you were to do the home made kit with the same components and you've got to put in atleast an hour of elbow grease. You spent an extra $50 bucks for a reputable air cleaner kit that took minutes to install.