Another "dumb question".

II took my air filter and bracketing off. The stock crankcase breather bolts have the little hole. Is it possible to use the stock bolts, attach and run a 90° elbowed piece of tubing?

I hope that makes sense.

 

I found the air cleaner brace at jp cycles for $35 (p/n 4000405)

Also a crankcase breather kit at jp cycles for $30 (p/n 4000330)

My other idea was to attach the rubber hoses with worm clamps and vent outside.

 

Or the complete kit for $45 on ebay

Item: CRANKCASE BREATHER SUPPORT BRACKET KIT 93-07 HARLEY EVO with CV CARB

URL: http://pages.ebay.com/motors/link/?n...d=110951865857

Alt URL: http://www.ebay.com/itm/CRANKCASE-BR...-/110951865857

 

Pretty cool mod; I made one today. I'll post up some pics as soon as I get the breather bolts sorted out. I got the wrong ones so I'm sorting that out. Total time to modify the air cleaner, scuff it up and spray it with some black appliance paint was about 30 minutes.

Correct breather bolts will be on the way tomorrow.

 

I put a K&N in mine and love it. I can actually get my knee against the tank with it.

 

Cool set up!

 

Apologies, I haven't been here for a while.

You can get the four-inch and louvered cleaners at www.coolair.co.uk

Links:

www.coolairvw.co.uk/Item/Shop_by_Vehicle~Beetle_Products~Beetle_Engine_Prod ucts~Fuel_Intake_System~Carburettors~Air_Filters/AC129150910/Mini_Air_Filter_4_Inch_X_3_Inch.html

and

www.coolairvw.co.uk/Item/Shop_by_Vehicle~Beetle_Products~Beetle_Engine_Prod ucts~Fuel_Intake_System~Carburettors~Air_Filters/AC129741L/Solex_Carburettor_Louvered_Air_Filter.html

 

Hi, no probs. Thanks for taking the time to post the links. Going to get myself one now and have a go at this. Nice little project for the up and coming winter...

 

Got the correct breather bolts today and finished it up.

 

On my ca model, I have a tube that connects to the emissions canister from the back plate of the air breather... does anybody have a way to connect this??