Sportster Models 883, 883 Custom, 1200 Custom, 883L, 1200L, 1200S, 1200 Roadster, XR1200, and the Nightster.
Sponsored by:
Sponsored by:

pre-2004 rubber mounted Sportster -- engine vibration

Thread Tools
 
Search this Thread
 
  #1  
Old 08-25-2006 | 01:00 AM
cosmicHD's Avatar
cosmicHD
Thread Starter
|
Road Warrior
Joined: Jul 2006
Posts: 1,388
Likes: 2
Default pre-2004 rubber mounted Sportster -- engine vibration

How much engine vibration does a 2000 model XL1200 get? Is it completely bone jarring at highway speeds of 70-80 mph? Is it so much that it makes you not want to ride it at those speeds for too long?

I have a line on a 2000 Sportster, but do not want to take the long drive out to see it if the vibration is that wicked.

Thanks for the advice/input ahead of time.
 
  #2  
Old 08-25-2006 | 01:05 AM
roadhawg's Avatar
roadhawg
Cruiser
Joined: Jun 2006
Posts: 233
Likes: 0
From:
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I have a 2000 and ya they vibrate pretty good above 70 but don't bother me much, a little tingle in the hands is all I really get.
 
  #3  
Old 08-25-2006 | 01:18 AM
4DZTOY's Avatar
4DZTOY
Advanced
Joined: Aug 2006
Posts: 99
Likes: 0
From:
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I wouldn't call it bone jarring...but they will buzz pretty good....My wife doesn't care to ride much faster than about 70 on her '02 1200C. It's really pretty subjective thought...some people have a higher tolerance than others.... You will definately feel it through the bars.... tingly hands after a period of time is a given....
 
  #4  
Old 08-25-2006 | 12:11 PM
Arctic Badger's Avatar
Arctic Badger
Cruiser
Joined: Jul 2006
Posts: 193
Likes: 3
From:
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I've heard a lot about vibrations in the sporty series, and I dont have anything to compare it to, but I dont find the vibrations to be bad. I've had the bike up to 85 for bursts to pass trucks on the freeway. With wind blowing, traffic, pot holes, and the truck I diddn't even notice vibration. More so than vibration in my hands is the shakey mirrors. This being my first bike i'm not used to not being able to see the vehicle behind me clear enough to tell make and model (I like to know if a police cruiser is near me). Above 50 or so the mirrors begin to shake and shimmey. Even at high speeds I can always tell if a vehicle is there or not, just not much detail.

EDIT - Bah, diddnt read enough of the OP. I guess the vibration on my 05 isnt a lot of help when talking about 04's and earlier.
 
  #5  
Old 08-25-2006 | 12:30 PM
OldFenderGuy's Avatar
OldFenderGuy
Ultimate HDF Member
Joined: Sep 2005
Posts: 8,641
Likes: 24
From: Ozark Country
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

Gel-Palmed gloves are your friend...

Either full fingered or open fingered, depending on weather conditions...

 
  #6  
Old 08-25-2006 | 01:14 PM
oldgeezer's Avatar
oldgeezer
Grand HDF Member
Joined: Dec 2004
Posts: 4,513
Likes: 3
From: Midland, TX
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I rode a 2001 and the only time the vibration was a problem was on longer rides. It would make my knees aches. But then, I'm and old geezer. It wouldn't bother young whippersnappers as much.
 
  #7  
Old 08-25-2006 | 07:36 PM
Hagar the Horrible's Avatar
Hagar the Horrible
Outstanding HDF Member
Joined: Oct 2005
Posts: 2,002
Likes: 4
From: toontown
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I usually ride two lane back roads so 50 to maybe 65 max usually. The few times I have been on the highway anything over 65 seems like it is going to launch me off. Windsheild, no windsheild doesn't seem to matter I'm shackin baby. 2003 1200C
 
  #8  
Old 08-26-2006 | 01:06 AM
ionate's Avatar
ionate
Road Captain
Joined: Jun 2006
Posts: 593
Likes: 0
From: Austin, Texas
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I have never owned anything but a rubber mounted sporty, but I wasn't going to buy one unless it was an '04 or newer for that reason. It just seems like a great improvement over the original. Like the new "Sportster 2.0"!
 
  #9  
Old 08-26-2006 | 01:07 AM
Broken Leg Rider's Avatar
Broken Leg Rider
Road Master
Joined: Jul 2006
Posts: 887
Likes: 1
From: New Orleans
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

Well it puzzles me greatly that the rubber mounted engines cause so much bar vibration. I get about the same on my rigid mount 91, but it actually smooths out at select speeds above 50 mph. Why rubber mounts if they make the problem worse?

What gives here?
 
  #10  
Old 08-26-2006 | 09:51 PM
CBJCH's Avatar
CBJCH
Cruiser
Joined: Jul 2006
Posts: 117
Likes: 0
From:
Default RE: pre-2004 rubber mounted Sportster -- engine vibration

I was wondering why so much vibration in the bars as well. The mirrors on my o6 are very blurry between 52 and 65 mph. After that and at 50 mph the mirrors are clear. I either drive 50 or 70 Mostly 70 much more fun!!
Does any one else have the same thing?
 


Quick Reply: pre-2004 rubber mounted Sportster -- engine vibration



All times are GMT -5. The time now is 11:04 AM.