**How Many Iron 883 Owners Out There?**
#1853
02-27-2011 | 07:30 AM
Stage II
Joined: Feb 2011
Posts: 2
Likes: 0
My bike can Lick's you bike..
my 883... got the lick's solo and tool bags that i plan on installing today! check'em out:
http://thesportsterchronicles.blogsp...your-bike.html
#1854
02-27-2011 | 08:04 AM
Cruiser
Joined: Jun 2009
Posts: 193
Likes: 0
From: London UK
heres mine, along with a vid / pic of the new dakota digital gauge
http://www.youtube.com/watch?v=jE2sYRsrWpg
http://www.youtube.com/watch?v=jE2sYRsrWpg
#1856
02-28-2011 | 01:22 AM
Intermediate
Joined: Nov 2010
Posts: 38
Likes: 0
From: Milwaukee, USA
thanks bud,,,,
bikes a 2011 iron, 5 inch stretch, custom made swingarm. i was going to cut a factory swingarm up, but once i cut it and saw the material thickness, i ended up building my own. 4140 CM Rect tube, .125 wall. @17" has a structural srength of 11,920lbs. so it wont bend or etc with the shocks mounted so far up.
the offset pulley i ended up buying an atlas one, but was a 22 tooth, so sold i and machined my own 28 tooth.
also made the simple bearing support plate. nothing fancy.
bikes a 2011 iron, 5 inch stretch, custom made swingarm. i was going to cut a factory swingarm up, but once i cut it and saw the material thickness, i ended up building my own. 4140 CM Rect tube, .125 wall. @17" has a structural srength of 11,920lbs. so it wont bend or etc with the shocks mounted so far up.
the offset pulley i ended up buying an atlas one, but was a 22 tooth, so sold i and machined my own 28 tooth.
also made the simple bearing support plate. nothing fancy.
#1859
02-28-2011 | 11:41 AM
Road Master
Joined: Aug 2010
Posts: 1,039
Likes: 0
From: Central FL
There are a few things that you need to set manually, like the gear selector and bike type (Sportster or Dyna for gas purposes).
Gauge is really EASY to install and setup, but it is kinda pricey.
