I got my new apes and I am pretty happy with what the guy did with them. I have some preliminary measurements and would like to know what I need as far as cables. From the base bottom of the bars to the peak is about 14", the base of the bars is about 9 3/4" wide, the total width from tip to tip is 38 3/4, and the pullback looks to be around 6-7".

I would like to run the Harley Diamond Black cables for the mini-apes if they will work. I know the clutch cable is +7 and the throttle/idle cables are +6 but I can't find the measurement for the brake line for the black diamon.

I held them up over the stock bars and it appeared I needed about 7" to get from where the hand controls were on the old bars to the new bars but don't know how to accurately measure what I need. If anyone can tell me if the black diamonds would work or give me an idea what I need I would greatly appreciate it.