Help identify this piston

Reply Subscribe

Thread Tools

Search this Thread

#11

11-21-2022 | 10:53 AM

aswracing

Road Captain

Joined: Mar 2009

Posts: 578

Likes: 560

Quote:

The cams are 1200 because of the W on them.

2007+ XL883's also came with "W" cams. Those are your stock cams.

Also, the motor is an 883. If you measure the bore, you'll see it's 3" in diameter. Stock head gaskets too.

Reply Like

#12

11-22-2022 | 01:23 PM

NolaSaint4313

Thread Starter

Stage IV

Joined: Nov 2021

Posts: 4

Likes: 0

From: New Orleans

Quote:

Originally Posted by aswracing

2007+ XL883's also came with "W" cams. Those are your stock cams.

Also, the motor is an 883. If you measure the bore, you'll see it's 3" in diameter. Stock head gaskets too.

OK thank you all for the information that's what I was needing to know so I need 1200 jugs rocker boxes cams etc. So basically I need to find a 1200 top and bottom and just power plant that then part this **** out

Reply Like

#13

11-22-2022 | 07:24 PM

John Harper

HDF Community Team

Joined: Dec 2011

Posts: 7,043

Likes: 2,039

From: San Diego, CA

Quote:

Originally Posted by NolaSaint4313

Check Craigslist. I've seen a few 1200 motors for sale in the San Diego area. Most are complete, some were for projects that just never happened. Good luck.

John

Reply Like

#14

11-24-2022 | 08:49 AM

TexasScooterTrash

Stellar HDF Member

Joined: Feb 2013

Posts: 2,729

Likes: 1,420

From: Dallas, Texas

Sorry to be the one to point this out. If you have no idea how to measure the bore of a cylinder, just maybe Harley engine repair is not something you should undertake. Good luck with the Learning Experience.

Reply Like

The following 2 users liked this post by TexasScooterTrash:

apache snow (11-24-2022), TwiZted Biker (11-24-2022)