Hello guys I need your help finding the orings that go to the little screws on the primary inspection cover. It’s the 2 small screws that hold the cover in place. I was able to find plenty of the drain plug orings and the large one for the inspection cover itself but not the ones for the smaller screws.

 

Should be #9

In the future go to Ronnie’s Harley microfiche parts and you can find anything. Good idea to even verify what I posted since I’m just a guy on the internet lol.

 

Thank you man that’s exactly what I needed!!!

 

I sell those small 'O' rings in my stainless steel screw kit for the rubber mounted Sportsters, the ones I supply are 6mm i/d x 2mm cross section black nitrile 70. I buy them from an electricians merchant at £4.00 for a bag of one hundred.

See below.

 

Glad you got your answer, but that would be one of those things I wouldn't mind going to the dealership for. Buy four quarts of oil, oil filter and any o rings needed. And if you are lucky they guy behind the counter knows which ones you need. Not expensive, good luck.