Thank you sir!

 

I have had the pump out of my partner's Sportster three times to get the tank painted and corrected.

It is not hard but something of a heads-up the wiring is fixed in a special plug that I cannot figure how to get out. It maybe just not possible so be careful to not damage the wires.

 

Thanks for the heads up!

 

I wasn't sure about the connector on the tank either so I disconnected the other end near the battery. It seems like the pump will only fit back in the tank hole when inserting at a certain angle. Just go slow and don't force it you will eventually find the correct angle.

 

That is the only way to go from the manual.

 

Nice additions, you did good.

 

Thank you sir!

 

Guess I'm gonna grab a tuner for his bike now, I wish I could just use a license for the power vision or TTS that I have for my 2019 CVO SG but I see the sportster uses a different one.

 

If you have the blue dongle (not black), you can get your Mastertune license & dongle updated for
two bikes for like $200. I have two different cables, one for the Sportster(J1850) and one for my Softail (CANbus)
Works great on both.

https://www.mastertune.net/products_mastertune.html

hth,

T.

 

Ok thanks, I have a blue one that I no longer use but it was for my 2019 cvo, I don't have cables so that would be about $50 more so I would be in it for about 250, I will probably just buy a power vision for it since I can get that less that $400