Hey there ladies and gents,

So I got the dk kit to relocate my tag, long story short I suck with non pictured instructions. Can this be mounted here? Obviously not in this orientation but inside the shock on the bolt with the nut securing it. From what I read it goes somewhere on the outsider of the shock but then something about the bushing was mentioned.
Don’t wanna mess things up.

Thanks.

 

If it will fit there, you will be fine. Just make sure it clears everything.

 

thanks, it does fit and has a good 1/2” clearance or more from brake disc. Photo may not show.

 

Looks good, I would run it.

 

it will be fine, mine is also mounted to the shock bolt

 

Copy that

but to the inside or out? I was cautious of mounting it on the outside on that bushing. I was under the impression it allowed for some movement.

See between shock and swing arm mount there’s that bushing.

 

mine is between that bushing and the frame mount............mine also does not have that inside nut, my shock bolt screws into the frame

 

copy, so no adverse effects with mounting it to that location then. Thanks.

 

zero problems, also only bout 1/2" clearance to disc