Does the ignition control module supply the voltage to the primary side of the coil? I have no spark at either plug and plugs are good.

 

The white/black wire is the power to the coil and the module. They're common from the main ignition power breaker. It's not that one passes through to the other. The module controls the spark by opening and closing the ground side of the coil (pink wire).

 

Thanks for the reply, Scuba10jdl.

I found a few threads on this site on this subject yesterday and was able to rule out the coil, plug and the module.
I finally hooked up the bike via jumber cables from my truck and everything came alive. The Harley battery showed a full charge but wouldn't crank.

This forum helped me solve my problem and I appreciate that.

You guys rock!

BB