48 stock exhaust project!
#1
48 stock exhaust project!
I am currently running SS on my 48 and I'm wanting something different so here goes. I' going to see what these stock pipes will turn out like with looks, sound, and performance. I'll post pics as I go.
Cut right behind where the baffle was welded in.
Removed packing and cut off the cat i assume.
Removed the baffle from sleave.
Drilled out larger holes in hopes of a different sound.
Weldeded back together.
Ground off the weld for a slick look.
Removed the paint and now ready to sand with fine grit. I am wanting to find a clearcoat that will hold up to the heat and leave them polished.
Removed packing and cut off the cat i assume.
Removed the baffle from sleave.
Drilled out larger holes in hopes of a different sound.
Weldeded back together.
Ground off the weld for a slick look.
Removed the paint and now ready to sand with fine grit. I am wanting to find a clearcoat that will hold up to the heat and leave them polished.
#3
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
#4
#5
#6
#7
VHT's Engine Enamel comes in a gloss clear. It's good up to 550°, which might be ok for those cans. They also have a clear in their Flameproof line, but it's a satin, not a gloss.
Trending Topics
#9
Nice job you're doing there!
Check out Thunder Torque Inserts™ for a better sound as well as a performance gain. They will deepen the tone of the exhaust a bit giving it a throatier growl. They also give you a gain in low and mid range torque.
Here's what we did with the stock exhaust on a 48-
Here's a LINK to the TTIs.
Check out Thunder Torque Inserts™ for a better sound as well as a performance gain. They will deepen the tone of the exhaust a bit giving it a throatier growl. They also give you a gain in low and mid range torque.
Here's what we did with the stock exhaust on a 48-
Here's a LINK to the TTIs.
__________________
Cristy
FREE SHIPPING - ORDERS OF $100 OR MORE - LOWER 48 STATES
www.DKCustom.com
Call: 662-252-8828
Text: 662-420-4891
Email: Support@DKCustomProducts.com
Cristy
FREE SHIPPING - ORDERS OF $100 OR MORE - LOWER 48 STATES
www.DKCustom.com
Call: 662-252-8828
Text: 662-420-4891
Email: Support@DKCustomProducts.com
#10
Nice job you're doing there!
Check out Thunder Torque Inserts™ for a better sound as well as a performance gain. They will deepen the tone of the exhaust a bit giving it a throatier growl. They also give you a gain in low and mid range torque.
Here's what we did with the stock exhaust on a 48-
https://youtu.be/8U19Sx0el4k
Here's a LINK to the TTIs.
Check out Thunder Torque Inserts™ for a better sound as well as a performance gain. They will deepen the tone of the exhaust a bit giving it a throatier growl. They also give you a gain in low and mid range torque.
Here's what we did with the stock exhaust on a 48-
https://youtu.be/8U19Sx0el4k
Here's a LINK to the TTIs.
The following users liked this post:
DK Custom - ST (04-13-2018)