Best slip ons for sportster
#71
#72
Join Date: Apr 2012
Location: Northern Los Angeles area.
Posts: 1,720
Received 227 Likes
on
198 Posts
The following users liked this post:
Casper (12-25-2018)
#73
You will get a pleasant note not too hard on the ears and slightly different lower tone that’s not obnoxious.
Wiz Out 🍺
Last edited by Wizardofaus; 12-25-2018 at 06:17 PM.
The following users liked this post:
Casper (12-25-2018)
The following users liked this post:
Sporty4ever (01-18-2019)
#75
Join Date: Apr 2012
Location: Northern Los Angeles area.
Posts: 1,720
Received 227 Likes
on
198 Posts
#76
Start with a small hole and slowly take it from there: https://www.homedepot.com/p/Grip-Rit...SPKE/100156844
You'll have to get a 6”-12” extension as well.
Wiz 🍺
#79
#80
I know this is an older thready, but has anyone run TTI's in a set of the 2.5" python slash cuts? If so what size would work best? There is a screw on the inside at the rear of the muffler to hold in the stock baffle in. Just worried about installation in the smaller diameter since alot of the slip ons are 3"
Thread
Thread Starter
Forum
Replies
Last Post