Wiring Question for those that know more than I do
#11
I didn't on mine. Think about it. The modulator makes the turn signals work as run and brake. If the original tail light is left in place the brake and run still work as normal. So use those wires to any other auxiliary light and it will work the same way
#12
#13
The problem with this is he said his lights are only 3 wire not 4 like in your schematic.
#14
#17
#18
there should be a harness/plug under the seat towards the back or mooshed in there somewhere and should also have a big white tag on it
there will be a few wires in this harness maybe 8 i dont remember
cant remember the colors exact in this plug either
there is a blue wire in the plug -- this will goto the red wire of the new light
there is a red with a white stripe in the same plug--- this will goto the yellow of the new light
just use wire splice tap or t-tap splicer and u should be set
the lights ground u can ground anywhere u want
if u tap into the wires leading to the turn signals they will flash and freak out
u have to tap into the plug/harness i speak of and should work fine
there will be a few wires in this harness maybe 8 i dont remember
cant remember the colors exact in this plug either
there is a blue wire in the plug -- this will goto the red wire of the new light
there is a red with a white stripe in the same plug--- this will goto the yellow of the new light
just use wire splice tap or t-tap splicer and u should be set
the lights ground u can ground anywhere u want
if u tap into the wires leading to the turn signals they will flash and freak out
u have to tap into the plug/harness i speak of and should work fine
Last edited by elfnyc; 02-22-2017 at 11:28 PM.
#19
there should be a harness/plug under the seat towards the back or mooshed in there somewhere and should also have a big white tag on it
there will be a few wires in this harness maybe 8 i dont remember
cant remember the colors exact in this plug either
there is a blue wire in the plug -- this will goto the red wire of the new light
there is a red with a white stripe in the same plug--- this will goto the yellow of the new light
just use wire splice tap or t-tap splicer and u should be set
the lights ground u can ground anywhere u want
if u tap into the wires leading to the turn signals they will flash and freak out
u have to tap into the plug/harness i speak of and should work fine
there will be a few wires in this harness maybe 8 i dont remember
cant remember the colors exact in this plug either
there is a blue wire in the plug -- this will goto the red wire of the new light
there is a red with a white stripe in the same plug--- this will goto the yellow of the new light
just use wire splice tap or t-tap splicer and u should be set
the lights ground u can ground anywhere u want
if u tap into the wires leading to the turn signals they will flash and freak out
u have to tap into the plug/harness i speak of and should work fine