Cycle Shack pipe ID Help
#1
Cycle Shack pipe ID Help
These pipes were on my wife's 2007 1200L when we purchased it. I have not been able to identify what Cycle Shack pipes they are. One piece pipe and muffler, uses the stock crossover mount pipe. The previous owner didn't put and open air box or tuner on it and it runs a little rough down low. Time to do some mods.
#4
Those aren't slip ons. I've got the same ones, Cycle Shack calls them "M" pipes.
There are two versions, PHD160T has the 1 3/4" headers, PHD260T has the 2" stepped headers.
http://www.cycle-shack.com/cycle/ago...=Muffler+Pipes
The old discontinued version without the o2 sensors were PHD130T and PHD230T, about 3 years ago a bunch popped up on Amazon, new in the box with the heat shields included for $80 shipped. I couldn't pass it up. The tapered ones look real close to stock, but they sure don't sound like stock.
There are two versions, PHD160T has the 1 3/4" headers, PHD260T has the 2" stepped headers.
http://www.cycle-shack.com/cycle/ago...=Muffler+Pipes
The old discontinued version without the o2 sensors were PHD130T and PHD230T, about 3 years ago a bunch popped up on Amazon, new in the box with the heat shields included for $80 shipped. I couldn't pass it up. The tapered ones look real close to stock, but they sure don't sound like stock.
Last edited by edgeofinsanity; 08-01-2016 at 03:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ZeroFiveFour
Dyna Glide Models
9
04-26-2011 09:26 AM