No more messy oil change, free tool
#1
#2
#5
RE: No more messy oil change, free tool
I did that based on someone's recommendation here.. It captured a lot of the oil but some did drip on the frame. The bottle can't go under the filter completely becuase there is a casting part of the block under the oil filter which is almost flush with the filter sealing surface.. Am I the only one who experienced this??
BTW - iasporty - your sig pic looks like your carrying an upside down garbage can on your back seat!!
BTW - iasporty - your sig pic looks like your carrying an upside down garbage can on your back seat!!
#7
Trending Topics
#9
RE: No more messy oil change, free tool
I use a 1L bottle.
denisl, if you still have oil on the frame, you are not doing it right. You have to place the bottle very close to the engine block. The oil change I did this morning didn't even have a drop of oil, go figure. I used to use brake clean to clean it after, not anymore.
denisl, if you still have oil on the frame, you are not doing it right. You have to place the bottle very close to the engine block. The oil change I did this morning didn't even have a drop of oil, go figure. I used to use brake clean to clean it after, not anymore.