Cvaria's 2007 883 Standard (XLCN): Consolidated Thread of Nonsense (Working)
#811
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
The following users liked this post:
Dheez (09-30-2017)
#812
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
while at the dealer yesterday picking up goodies. i talked to the parts folks about the fun that was going on with the rocker screws. they showed me all the new rocker goods hd replaced. the new gasket sets are serious. hardish black. so i guess the updated them again since i last bought one in 2012/13, when they were orange.
looked at the daymaker and figured i'd test it like all the rest i've gone through. so i ordered it from surdyke. got it in black. they have it for 340
5-3/4 in. Daymaker Signature Reflector LED Headlamp - Black-67700356
looked at the daymaker and figured i'd test it like all the rest i've gone through. so i ordered it from surdyke. got it in black. they have it for 340
5-3/4 in. Daymaker Signature Reflector LED Headlamp - Black-67700356
Last edited by cvaria; 10-05-2017 at 08:08 PM.
The following users liked this post:
Dheez (10-05-2017)
#813
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
went out bombing around to see if the doubled adapter anti-rotation devices would hold.
they did work but, as suggested, i need to have something wider fabbed up.
went by the dealer an picked up my overlay and it confirmed my butt dyno. everything was shifted and if i were to raise the rev limit. it would keep on going but, i'm not doing it. super happy and still need to get down to doc. haven talk to him since Irma.
they did work but, as suggested, i need to have something wider fabbed up.
went by the dealer an picked up my overlay and it confirmed my butt dyno. everything was shifted and if i were to raise the rev limit. it would keep on going but, i'm not doing it. super happy and still need to get down to doc. haven talk to him since Irma.
Last edited by cvaria; 10-06-2017 at 06:36 PM.
#814
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
The following users liked this post:
Dheez (10-11-2017)
#815
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
so i ordered it and will compare.
Last edited by cvaria; 10-11-2017 at 02:00 PM.
The following 2 users liked this post by cvaria:
Dheez (10-11-2017),
slvrscoobie (10-11-2017)
#816
#817
pretty sure i just found the jwspeaker light this is based on. Guess hd is at it agggain. The jw 8620,https://www.jwspeaker.com/products/r...#product_parts , is sold through drag specialties as the premuim led hedlight... http://www.dragspecialties.com/produ...umber=20011335
so i ordered it and will compare.
so i ordered it and will compare.
a Chrome bezel. Now if they had a gloss black version, maybe.....
T.
#818
#819
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
ignition switch related ignorance fail
while doing normal brain washing, coffee, and work email catch-up this morning, youtube was playing random vids on one of my screens.. v-rod walkthroughrandomly looked over and saw this:
paused it and jumped to outpost alaska parts finder to see what was happening back there:
so... still waiting on the big bear chopper mount(they sent it off to be re-anodized black to hide the engraved "BBC"), have everything else but, will look for an ebay deal on the vrod goods for a day or so before going ahead and ordering the set up from boardtracker along with some other stuff i've been eyeing.
should have zero problems unloading the BBC relocation mount. the vrod mount may be set up for the two pin switch used on the more recent dynas, not the wide blade on the ones i've been fooling with. dremel can fix that but, that may ruin the structural integrity. fun times.
edit:
asked/answered... popped right up by part number. bought . will order 70433-06 from the dealer later.
2004-2013 sportster?
paused it and jumped to outpost alaska parts finder to see what was happening back there:
so... still waiting on the big bear chopper mount(they sent it off to be re-anodized black to hide the engraved "BBC"), have everything else but, will look for an ebay deal on the vrod goods for a day or so before going ahead and ordering the set up from boardtracker along with some other stuff i've been eyeing.
should have zero problems unloading the BBC relocation mount. the vrod mount may be set up for the two pin switch used on the more recent dynas, not the wide blade on the ones i've been fooling with. dremel can fix that but, that may ruin the structural integrity. fun times.
edit:
asked/answered... popped right up by part number. bought . will order 70433-06 from the dealer later.
2004-2013 sportster?
Last edited by cvaria; 10-12-2017 at 07:06 AM.
The following users liked this post:
slvrscoobie (10-12-2017)
#820