Hi Ronder,

I wish I could tell you for sure. We test pretty thoroughly...and unfortunately, not everything passes our tests.

Off the subject...last week we tested a different part that we had been working on for months. It did not produce the results we were looking for and has been set aside. We may re-visit it later this year.

Back on subject...if the Aux lights pass our tests, it should be within the month.

 

Thanks DK.... Great to have you here to answer questions

 

I have the GTR Lighting Gen 2 LED on my 2012 XL1200C. My buddy and I split a kit (He has a Rocker C), and we both love them. 3600LM low beam is killer. Of course we didn't buy from gtrlightning.com, as we sourced them ourselves from aliexpress.com. Saves a bunch of money.

 

If you go beyond the DK upgrade and install LED turns and such with a load equalizer it will not fit under your seat it has to be tucked under a control box along side the rear signal harness to fit .

This is below module



Module reinstalled

 

glad you got them in there. mine is different. i don't remember which year it was but, the module moved into that cavity recently. my 07 has the module on the rear fender. glad it does... the triple play and the stabilizer would not have fit otherwise.:



cramped




triple play on top and load stabilizer crammed up under there.




http://www.customdynamics.com/tailconversion_kit.htm

http://www.customdynamics.com/loadequalizer.htm






pollen!

 

Your bike is fuel injected. Mine is carb. Easy to spot that big module under the seat.

 

This is true but, the newer bikes have the module moved under tge seat as well to "allow for more seat options"

I remember seeing it somewhere on a "model changes" list

 

We call them citiots.

 

Don't those things throw a lot of heat? I know on the Vette we had to be extremely careful where we put the Load equalizers as they would melt plastic

 

Not sure Honestly. I've never felt heat under my ****