There is nothing to rewire. The new can bus systems have plugs that are small enough to pull through the bars. You just unplug them from under the tank, and pull them out of the old bars, then feed them through the new bars and plug them back in.
Thanks for the info on the wiring - any shortcuts on redoing the clutch and brake lines?
Thanks for the info on the wiring - any shortcuts on redoing the clutch and brake lines?
Not really, they are pretty straight forward. I didn't drain the tranny. Just put the tires up on a 2x10 or 2 and put the bike on the jiffy stand. The lean should be enough to keep the majority of the tranny fluid in. Make sure you get a new gasket for that side tranny cover.