Mark: hey brah, I had a hell of a time today! That was actually a really fun ride!! Cracklin pipes, slammin the twisties by sandy's beaches as if we were on our gixxers lol, a little drag racing action!! Fvcking cool! It's always good to ride a little bit on the stupid side sometimes! Thanks!

 

lol Mark same 4 bikes...just swapped to some BR Custom bars on my nitetrain and swapped from broomsticks to some 1 1/2 inch Carlini dragbars for my deluxe.

just had 2 bros go up to see TJ last week and one bought a set of 18 inch 1 1/4 flyin apes and the other originally bought some 14 inch 1 /4 inch gangster apes for his victory but he's sendin them back for some 18 inch gangster apes...

 

Very cool Mark. Good job!

 

I have a set of poly bushings on my bars. Perfect. Feels almost solid but dampens nicely.

 

Yeah b/c the top comes off with just that bolt, the bottom of the trip is holding the stem with that clamp. I thought I needed to b/c the bottom trip I need to get powder coated and the bottom bearing and race are on there.

 

The stem DOES NOT COME OUT... You will only damage it trying to romove it... The bearing needs to be removed... they make a puller for that if the indy doesn't have the right pulley they can cut it off. After the bearing is off it goes to PC as is the PC'er will tape up the stem so that portion is not PC'ed.

 

Ah ok I will do that then glad you told me thanks.

 

Whats up girls? I see lifes been good to most of you. Been pretty crazy around here. Mark dig the open belt, its on my list.
Chuck sweet pan set up.
I got 100 pages to catch up on later.

 

Thanks Oregon,

I'll grab a set of the poly's then!

 

Hey G, got my drop springs from patriot suspension today, question for you were the aluminum spacers they included already cut to proper length?