Heres my 07 next is shotgun shock, what kit is better for the front progressive drop in or burly I have both, but heard that the drop in doesen't rebound like stock??
I just put an 08' wheel on mine, it will fit with a 3/4' bearing kit and you will need longer spacers. The hub on the 08 is the same width on the caliper side and lines right up with the caliper. On the pulley side I had to use a 3/8" pulley spacer as it is shorter on the pulley side. Axle and pulley spacers can be had here www.vulcanworks.net
I had Cygnus measure from corner of tire sidewall to inner fender on both sides with my stock rim so I could make sure I had the new wheel centered exactly where the stock wheel was. (Because I forgot to)
But yours is an 06 and I think that has different spacing than an 07, I know your pulley is wider and the belt guard lines up differently as well i believe... Hell i'll find out here shortly lol. I'll keep the link for spacers for sure though just in case.
What's up stash, thought that bike looked familiar on Instagram ha ha
Your paint job just gave me a rush tonkak.I though I was getting a return on that blotter I dropped in 72.Damn that's some busy paint you got going on there.
Yo 44 you been getting some north Ga. Strange lately?
Yah its busy as ****..looks better up close,It was originally just supposed to be bandana wraped around the edges of the tins but painter got carried away i'll leave it for this summer then have it repainted. I want to change the back fender to something like what you have,hate the stock fender.