We had a heat wave here today. It was 60 degrees out so I took a ride to Nashville and back for some business! Love to listen to my bike sing its sweet tune!
Simple thing first Dan. Did you get all the wires back on the battery. One of the ground wires always seems to slip down when I change batteries on softys.Thats a sweet 03 btw.
Simple thing first Dan. Did you get all the wires back on the battery. One of the ground wires always seems to slip down when I change batteries on softys.Thats a sweet 03 btw.
Thanks BA I don't know that there was anything else connected to the negative when I took it off? Where does it go?
Wow!!!! Pretty Dead in here........ Well my rear wheel project has hit a major snag, I was fitting up for spacers and had the rotor held on by two brand new chrome bolts an snapped half of a rotor bolt in the hub of the new wheel upon taking it out. Thinking there was a burr in the threads and it picked it up and drug it on the way out???... Efff Me Runnin!!! Tried to to drill and use an EZ out but that isn't going to work. Tried alittle heat from a propane torch but not wanting to get it too hot and burn the powder coat I stopped as it wasn't helping either. I decided to take it to the dealer for advice after stopping at 3 machine shops who either didn't want to touch it or couldn't guarantee they wouldn't scratch the crap out of it. Now I wait....service guy at dealer says he's 95% sure he can get it out.