Okay just got back it is from the edge of the bearing 14" So I would think somewhere around 14.75" or 15" from the center? Hope this helps Lund... Shovel is looking slick I would have voted for ya

 

What bike is it going on? I'm assuming it's going on the Train? 2D did it with stock trips.

 

The train. What else! Gotta keep up with you.

 

Bobber

 

Lund 2D did it before everyone with stock NT trips so it can work.

Talk to you guys later gotta close up shop

 

Thanks Mark
So let me get this straight.
Mine =13
Tx=13.5
808=14.75
Damn thats big! Running 0* FL trees which the legs sit back from from the neck, where the softails legs sit forward of the neck & are 3* raked but, the nacelle won't bolt to w/o welding tabs on the tree's. Ok I'm nice and confused I'll figure it out when it gets here. Night night.

 

Correction 14. Chuck measured from bearing edge, so did I, not to far off.

 

cheers lund

 

what up foolios...

tryin to decide what to do with my wifes stock mags. powder coat em all gloss black, or have a strip of silver on the inside of the 9 spokes..

 

heres a stock photo of the wheels from that year.., was thinkin about havin the powder coater leave the inside of the wheels silver, just coat the rim and the outside of the spokes