Deluxe Pictures
#391
06-23-2006, 04:44 PM
Road Master
Join Date: Jun 2006
Location: las vegas, nv
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
#392
06-24-2006, 12:55 PM
Tourer
#394
06-24-2006, 03:06 PM
Grand HDF Member
RE: Deluxe Pictures
ORIGINAL: Luxe
I bought my seat rail & back rest pad from Zanotti Motor Co. in Butler , PA. The rail pn# 52687-97 was $120.78, and the low pad pn# 52826-97 was $70.06. I do get support out of the back rest pad since I had some foam taken out on the seat, allowing me to move back slightly. The passenger boards are the matching HD tappered boards, mounted on Kuryakyn mounts, along with a little custom work. As for the passenger seating I have a touring pillion that I put on as well as bags, & a docking kit & back rest...oh and a dockable nostalgic windsheild. I just think it looks better this way
I bought my seat rail & back rest pad from Zanotti Motor Co. in Butler , PA. The rail pn# 52687-97 was $120.78, and the low pad pn# 52826-97 was $70.06. I do get support out of the back rest pad since I had some foam taken out on the seat, allowing me to move back slightly. The passenger boards are the matching HD tappered boards, mounted on Kuryakyn mounts, along with a little custom work. As for the passenger seating I have a touring pillion that I put on as well as bags, & a docking kit & back rest...oh and a dockable nostalgic windsheild. I just think it looks better this way
Thanks
#395
06-24-2006, 07:48 PM
#396
06-25-2006, 03:15 AM
RE: Deluxe Pictures
I got the pulley, rotors & rotor hardware from www.kcint.com . Don't bother getting the pulley hardware from them as it will not be long enough. I also needed a 9/16" spacer to mount the piulley and 2" PM bolts to attach. My pulley was a 70 tooth x 1/18" wide with a 2 1/4" center hole. Make sure you order yours correct. They are dead serious, NO RETURNS. The first pulley I ordered I measured the with of the pulley, and not the belt. I got a 1 1/2" belt width pulley by my own error. They would not take it back, even in the original packaging, unmounted, freight paid, I even offer a percentage for restocking, no way! I managed to sell it on ebay and recoup everything except the freight. Good luck with your project.
Pulley http://kcint.zoovy.com/c=fQRu8PFQJbL...MESH-PULLEY-09
Rotors http://kcint.zoovy.com/c=fQRu8PFQJbL...E-2142-44PR-09
Rotor bolts http://kcint.zoovy.com/c=fQRu8PFQJbL...CRB-516-380-01
Pulley Spacer http://vulcanworks.net/2000-UP-Pulle...ers-p-369.html
Pulley Bolts were PM 12 point pulley kit # PM-0109-0057-SS
Pulley http://kcint.zoovy.com/c=fQRu8PFQJbL...MESH-PULLEY-09
Rotors http://kcint.zoovy.com/c=fQRu8PFQJbL...E-2142-44PR-09
Rotor bolts http://kcint.zoovy.com/c=fQRu8PFQJbL...CRB-516-380-01
Pulley Spacer http://vulcanworks.net/2000-UP-Pulle...ers-p-369.html
Pulley Bolts were PM 12 point pulley kit # PM-0109-0057-SS
#398
06-25-2006, 02:19 PM
Tourer