Deluxe Pictures
#2142
03-01-2008, 08:03 PM
Advanced
Join Date: Dec 2007
Location: Norman, Oklahoma
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
RE: Deluxe Pictures
ORIGINAL: J and K
New to this post and still working on a picture. In the mean time I've got a question for those that have Samson Longtails on your Deluxe. I just put some on my wifes 08 Deluxe and had the dealership dyno with a racetuner and already I am noticing some light gold color on the muffler from the rear cylinder. Have any of you had this happen?
New to this post and still working on a picture. In the mean time I've got a question for those that have Samson Longtails on your Deluxe. I just put some on my wifes 08 Deluxe and had the dealership dyno with a racetuner and already I am noticing some light gold color on the muffler from the rear cylinder. Have any of you had this happen?
I am not sure if I have the right picture here of the problem, but I'll upload one tomorrow if not.
[IMG]local://upfiles/48755/99ED87282153438C851534E987C460EB.jpg[/IMG]
#2143
03-01-2008, 08:23 PM
Advanced
Join Date: Dec 2007
Location: Norman, Oklahoma
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
#2144
03-02-2008, 09:10 AM
RE: Deluxe Pictures
+I had posted this in the softail forum, but I thought that I should put it here in the Deluxe thread for full exposure to others with the tombstone tail light.
Well I was sceptical when I ordered a LED array from Custom Choppers on ebay, as the price was muchlessthan everyone elses price.
Ebay
I had to remove the bulb socket assembly and use the die grinder on the grey plastic base to recess the array, so it was not tight against the lens. Then I drilled a screw hole into the grey plastic base through the hole provided in the array. Through this I used a small #4 screw to mount the array. I then used hot glue to brace the top of the array between the cover mounting towers. As for the wiring it is soldered & shrink tubed. I am very pleased with the instensity & pattern. I know there were others with Springer Classics & Deluxes that were looking into adding a LED array to brighten up the dim tombstone tail. This actually works pretty good for about $50.00.
_____________________________
2005 Softail Deluxe EFI
Chopper Blue & White
Stage 1 A/C c/w K&N
HD auto primary tensioner
V&H True Duels
Terry's Terminal Velocity II EFI
SE203 cams, adjustable push rods
Chrome sweet Chrome
Well I was sceptical when I ordered a LED array from Custom Choppers on ebay, as the price was muchlessthan everyone elses price.
Ebay
I had to remove the bulb socket assembly and use the die grinder on the grey plastic base to recess the array, so it was not tight against the lens. Then I drilled a screw hole into the grey plastic base through the hole provided in the array. Through this I used a small #4 screw to mount the array. I then used hot glue to brace the top of the array between the cover mounting towers. As for the wiring it is soldered & shrink tubed. I am very pleased with the instensity & pattern. I know there were others with Springer Classics & Deluxes that were looking into adding a LED array to brighten up the dim tombstone tail. This actually works pretty good for about $50.00.
_____________________________
2005 Softail Deluxe EFI
Chopper Blue & White
Stage 1 A/C c/w K&N
HD auto primary tensioner
V&H True Duels
Terry's Terminal Velocity II EFI
SE203 cams, adjustable push rods
Chrome sweet Chrome
#2145
03-02-2008, 03:33 PM
Intermediate
Join Date: Oct 2006
Location: Norwich, England.
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
#2146
03-02-2008, 05:19 PM
#2147
03-02-2008, 07:21 PM
Advanced
Join Date: Apr 2007
Location: SE Pennsylvania
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
RE: Deluxe Pictures
Updated pic with a few winter mods.
Nostalgic grips
Laydown plate
Chrome frame inserts
Passenger pegs
Axle covers
Light/signal trim rings
Chrome switch housings
This has got to be the longest winter here insoutheast PA (not a lot of snow, but cold and miserable)... Ugh !!! Bring on the spring.
[IMG]local://upfiles/30360/F6BFC377D6E44FE0B1B15E5D00E314BC.jpg[/IMG]
Nostalgic grips
Laydown plate
Chrome frame inserts
Passenger pegs
Axle covers
Light/signal trim rings
Chrome switch housings
This has got to be the longest winter here insoutheast PA (not a lot of snow, but cold and miserable)... Ugh !!! Bring on the spring.
[IMG]local://upfiles/30360/F6BFC377D6E44FE0B1B15E5D00E314BC.jpg[/IMG]
#2148
03-02-2008, 09:46 PM
RE: Deluxe Pictures
New pics
[IMG]local://upfiles/52072/B978A09120FD40AF90FEFA7E7F50A969.jpg[/IMG]
[IMG]local://upfiles/52072/15200349130B4A46AD3C00BE282CC389.jpg[/IMG]
[IMG]local://upfiles/52072/C5895C98F2CA4E2DA6FA959C8E4D5AE6.jpg[/IMG]
[IMG]local://upfiles/52072/02799EFA96C64E87B2CEE04B1A7D568A.jpg[/IMG]
[IMG]local://upfiles/52072/3534755115494A12B305AD5DE9CEFFC9.jpg[/IMG]
[IMG]local://upfiles/52072/B978A09120FD40AF90FEFA7E7F50A969.jpg[/IMG]
[IMG]local://upfiles/52072/15200349130B4A46AD3C00BE282CC389.jpg[/IMG]
[IMG]local://upfiles/52072/C5895C98F2CA4E2DA6FA959C8E4D5AE6.jpg[/IMG]
[IMG]local://upfiles/52072/02799EFA96C64E87B2CEE04B1A7D568A.jpg[/IMG]
[IMG]local://upfiles/52072/3534755115494A12B305AD5DE9CEFFC9.jpg[/IMG]
#2150
03-03-2008, 08:21 AM
RE: Deluxe Pictures
ORIGINAL: LuxHD
They are 8 1/4" long and 4" high at the star. Sorry it took so long.
ORIGINAL: honeys05lux
LuxHD,
That is one of the three emblems my husband is looking at to put on my tank. How long is it? (Need to make sure it will fit in the painted insert.)
LuxHD,
That is one of the three emblems my husband is looking at to put on my tank. How long is it? (Need to make sure it will fit in the painted insert.)