Deluxe Pictures
#1083
04-05-2007, 08:51 PM
#1084
04-06-2007, 01:14 AM
#1085
04-06-2007, 04:45 AM
RE: Chrome Front end
05 HD Deluxe The V and H Big Shot/Long's that I am using have their own mounting hardware. It is a heavy 1/4 inch plate with 2 holes for mounting to the bike frame and 4 holes at the rear end to bolt on to the exhaust pipe mount point. My bags are mounted with the docking hardware for a removable back rest or the removable luggagerack that you see. I did not install the bottom re-enforcement bar on the right side because the foot bracket was removed to install the pipes. These bags are so small that I do not anticipate any problems with leaving this bar off of the bottom.
[IMG]local://upfiles/24064/BA58823D5F4F4E65809961C98DE849F7.jpg[/IMG]
[IMG]local://upfiles/24064/BA58823D5F4F4E65809961C98DE849F7.jpg[/IMG]
#1086
04-07-2007, 01:46 AM
#1087
04-07-2007, 03:26 PM
Road Captain
Join Date: Apr 2007
Location: Northern, NJ
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
RE: Deluxe Pictures
ORIGINAL: Luxe
I bought my seat rail & back rest pad from Zanotti Motor Co. in Butler , PA. The rail pn# 52687-97 was $120.78, and the low pad pn# 52826-97 was $70.06. I do get support out of the back rest pad since I had some foam taken out on the seat, allowing me to move back slightly. The passenger boards are the matching HD tappered boards, mounted on Kuryakyn mounts, along with a little custom work. As for the passenger seating I have a touring pillion that I put on as well as bags, & a docking kit & back rest...oh and a dockable nostalgic windsheild. I just think it looks better this way
I bought my seat rail & back rest pad from Zanotti Motor Co. in Butler , PA. The rail pn# 52687-97 was $120.78, and the low pad pn# 52826-97 was $70.06. I do get support out of the back rest pad since I had some foam taken out on the seat, allowing me to move back slightly. The passenger boards are the matching HD tappered boards, mounted on Kuryakyn mounts, along with a little custom work. As for the passenger seating I have a touring pillion that I put on as well as bags, & a docking kit & back rest...oh and a dockable nostalgic windsheild. I just think it looks better this way
#1089
04-08-2007, 08:41 AM
RE: Deluxe Pictures
ORIGINAL: Nostalgic07
Question for you Luxe...I also relocated my license plate, I noticed on your bike that you added 2 red dots to fill in the holes above the tomestone tailight! Did you have to modify the holes to make them fit?, and are they LED lighted or not??.....Good looking bike by the way...
Question for you Luxe...I also relocated my license plate, I noticed on your bike that you added 2 red dots to fill in the holes above the tomestone tailight! Did you have to modify the holes to make them fit?, and are they LED lighted or not??.....Good looking bike by the way...
#1090
04-08-2007, 11:18 AM
