Softail Standard Pictures
#1192
03-26-2010, 07:27 AM
#1193
03-26-2010, 09:25 AM
thanks. Only thing I did to the wires was change the brake cable out for a new one of the same length. The stock had that little section of hard line in there and I just didn't like the looks with that peice bent out straight. It was real close with all the switch wires but it worked
#1194
03-27-2010, 09:40 AM
thanks. Only thing I did to the wires was change the brake cable out for a new one of the same length. The stock had that little section of hard line in there and I just didn't like the looks with that peice bent out straight. It was real close with all the switch wires but it worked
#1197
03-28-2010, 10:15 AM
yep. All stock. except the brake thats same length. Wires I had them covered in a black mesh wire cover to give it a more complete look cause I didn't want to run them internal. It was tight with the wires but it worked. eventually I may swith out the throttle cables for maybe an extra inch. 12 inch custom chrome bars and 1.5 risers. I'm sure any bigger on risers or different bars I probably would have had to do a little more fidangling to get it to work
#1198
03-28-2010, 05:18 PM
Advanced
Join Date: Mar 2009
Location: West Midlands, UK
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Thank you
yep. All stock. except the brake thats same length. Wires I had them covered in a black mesh wire cover to give it a more complete look cause I didn't want to run them internal. It was tight with the wires but it worked. eventually I may swith out the throttle cables for maybe an extra inch. 12 inch custom chrome bars and 1.5 risers. I'm sure any bigger on risers or different bars I probably would have had to do a little more fidangling to get it to work
yep. All stock. except the brake thats same length. Wires I had them covered in a black mesh wire cover to give it a more complete look cause I didn't want to run them internal. It was tight with the wires but it worked. eventually I may swith out the throttle cables for maybe an extra inch. 12 inch custom chrome bars and 1.5 risers. I'm sure any bigger on risers or different bars I probably would have had to do a little more fidangling to get it to work
I am looking to go with 12" apes - how does the position of the grips compare to the stock bars? obviously a little higher but do you need to reach further forward, or is the pullback similar to the stock setup?
#1200
03-29-2010, 09:25 AM
little higher and it brought me to more of an upright seated position. Stock I was hunched over and my lower back was killing me. I like this much better.