Had the dealer change the triple tree on the wifes softail on Thursday. She went to ride today add there is no speedometer info. No turn signals,brake lights 4 ways, horn and the key for the alarm stays lit. Checked for codes on Power vision and the code U1097 comes up. Could this code cause all these issues. I unplugged the Power vision and no change. I am only using the Power Vision for the gauge function. It did show the MPH on it but nothing on the bike speedometer. Anyone have a idea what up up against. I know a call to the dealer tomorrow is in order.

 

Fuse, loose connector under the dash... I would not be too concerned at this point. Yes, take it back let them fix it.

 

If all was well before they worked on it.. then back she'd go if she was mine and I wouldn't touch anything. In fact I would have checked her out before leaving the service area.

I learned that on my very first time the dealer worked on mine at the 1k service

I now always have the writer do a pre and post check..

 

Everything worked when brought home. When to go for a ride yesterday and all this happened at start up. Runs well and alarm works and running lights are lit But thats about it.

 

Sounds like the ACC fuse is blown. Same symptoms I had when ACC fuse was shot.

 

Thats what it was. The front fender lights wires was pinched and broke which in turn blew the fuse. Dealer Fixed, all is well.