What did you do to Your Softail Today?
The following users liked this post:
teebeejek (05-20-2016)
#4023
The only challenge with the install was getting at the two allen bolts that are partially obscured by the elbow. I think I got them ok, but might go buy a 3/16" allen wrench just to be sure.
#4024
Thought maybe it was just perception. Thanks for the confirmation. The bike has the SE slip-ons and HD Stage I flash to the ECM from the previous owner. The decel pop was no worse (and surprisingly maybe even a little less) after the change to the 636v.
The only challenge with the install was getting at the two allen bolts that are partially obscured by the elbow. I think I got them ok, but might go buy a 3/16" allen wrench just to be sure.
The only challenge with the install was getting at the two allen bolts that are partially obscured by the elbow. I think I got them ok, but might go buy a 3/16" allen wrench just to be sure.
Last edited by FLS103; 05-20-2016 at 01:29 PM.
#4027
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,734
Received 4,200 Likes
on
2,441 Posts
Moved my mirrors down. Need to relocate the turn signals before they are usable again, but cleaned up the top of the bars.
WKENDS - I was looking at those before but on their web site, Wards says that their fans won't work with a coil relocation. Did you have to do anything special to mount them?
WKENDS - I was looking at those before but on their web site, Wards says that their fans won't work with a coil relocation. Did you have to do anything special to mount them?
Did it on mine a few years ago, and they work just fine. I'm going to write Jason about changing his wording on his website.
Here's a link to a thread that shows the parts -
https://www.hdforums.com/forum/softa...coil-relo.html
__________________
Win Up to $350.00 Cash from DK Custom This Month, Click HERE to see How!
DKCustomProducts.com
Win Up to $350.00 Cash from DK Custom This Month, Click HERE to see How!
DKCustomProducts.com
Last edited by DK Custom; 05-22-2016 at 01:23 AM.
#4028
Yes it "can" be that simple, but I didn't want my coil mounted outside the fan mount.
If you look at my picture, the fan mount is outboard. Makes for a more
compact/slim appearance IMHO.
T.
If you look at my picture, the fan mount is outboard. Makes for a more
compact/slim appearance IMHO.
T.
It is as simple as getting a coupling nut and a stud at a hardware store to extend the threads. That way you will have enough threads for the fans and the coil relocation.
Did it on mine a few years ago, and they work just fine. I'm going to write Jason about changing his wording on his website.
Here's a link to a thread that shows the parts -
https://www.hdforums.com/forum/softa...coil-relo.html
Did it on mine a few years ago, and they work just fine. I'm going to write Jason about changing his wording on his website.
Here's a link to a thread that shows the parts -
https://www.hdforums.com/forum/softa...coil-relo.html
#4029