What did you do to Your Softail Today?
The following users liked this post:
Clammy (09-06-2023)
Just looking at the parts, they're MUCH beefier than the stock clutch, and I really like the steel splines pressed into the hub, as opposed to the cast aluminum splines in the stock hub. I ordered the forged hub, so I don't know if that's a feature of the cast hub.
Just FYI, the main reason I settled on the Evo Ind clutch was because it was the only one I could find that came with the hub. All the other manufacturers seem to only sell the basket to be used with a stock hub. Just the size difference, of the plates, between the Evo Ind, and stock/others, and overall beefiness of the components, makes me feel like it was the better choice regardless. Another thing I really like is that they use 5/16-24 (1/4" Allen drive) socket head cap screws, with retaining cups, for the springs. I hated the tiny 4mm button head screws that the Barnett pressure plate kit came with. In fact, I stripped out 4 of the heads when I was removing them for this install (seems the HD tech really cranked them down when reassembling the primary).
I'll follow up as I put more miles on the clutch.
Cheers!
The following 2 users liked this post by Clammy:
hattitude (09-07-2023),
ThunderTruck (09-07-2023)
The following users liked this post:
ole_phart (09-07-2023)
Cheers!