is it just the angle of the picture or is the lower rear fender really close to the ground?
Amazing work with the wiring harness!

 

Thanks!
It is on the ground. I just threw it on there to mock it up. Need to figure out my brackets to mount it.

 

For me, winter in the Midwest means building on or re-building my bike. I found a brass oil gauge to match my brass oil lines so today I made a new bracket out of 3/16" aluminum plate. I also made some new pushrod covers out of 7/8" brass tubing and copper plate.

 

Fabricated a new bracket and relocated the coil.

 

External breather. (Crazy condensation in garage today. Look at cam cover).

 

[QUOTE=Rocking_it;20376065]External breather. (Crazy condensation in garage today. Look at cam cover).

I quit working on mine last night because it was soaking wet, IN THE GARAGE.

 

[QUOTE=DAHoyle;20377089]I had that problem also. I turned the heat on and keep it at 40F so condensation doesn't happen. When I used to keep it in my enclosed trailer I put a 100 watt light bulb close to the floor of the trailer but not close enough to ignite anything. Worked good

 

Switch hitting with the battery tender

Friday Forecast is 48 n sunny thus
Hoping to go for a lil scoot 💪

 

Got up to 56 here in the southern Black Hills so I got the first ride of 22' in. A bit chilly but a good ride none the less.

 

G'day Fellas.
Fired up the 88 softy after fitting the #50 primary Jet. Sounds good at full temp. Take her out for a road test tomorrow weather permitting (phu(king rain).
Cheers