02-13-2015, 02:41 PM
Last edit by: IB Advertising
Everything Breakout! Find out everything you need to know! Some topics include:
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
The Everything Breakout Thread
#5561
04-06-2017 | 05:08 AM
Advanced
Joined: Aug 2016
Posts: 60
Likes: 9
From: Wisbech Cambs.
Hey Paul, if you're going for the Thunderbike risers but maintaining the stock handle bars be aware that there might be issues with the tank clearance. At least there were for me with the switch housings touching the tank on full steering both left and right. I had to install some spacers to gain more clearance which turned out to be a good decision in terms of comfort, too.
Nope I don't go to any of their events. To go up there and back would take me 3 days....too much time and money (accommodation) involved.
Nope I don't go to any of their events. To go up there and back would take me 3 days....too much time and money (accommodation) involved.
#5564
04-06-2017 | 10:04 AM
Seasoned HDF Member
Joined: Sep 2013
Posts: 6,171
Likes: 1,947
From: Great State of Canada
Some on this page may suit.
https://www.denniskirk.com/search/20...+risers.q/2.pg
,,, and be cheaper.
.
https://www.denniskirk.com/search/20...+risers.q/2.pg
,,, and be cheaper.
.
#5568
04-08-2017 | 10:18 AM
Cruiser
Joined: Jun 2013
Posts: 111
Likes: 2
From: MA
Score! Cool that it worked out right.
After getting the new switch into the bracket and testing it, I cleaned the barrel of the new switch, the inside of the lever, the hole in the lever for the set screw and the set screw itself with acetone. I put some RED Loctite on the barrel of the switch - a drop on the flat and a drop on the side opposite of the flat. I put a drop on the screw and just snugged it down. Don't go full retard on the thing like we did before, LMAO!
I don't want that thing walking off ever again...so far, so good
After getting the new switch into the bracket and testing it, I cleaned the barrel of the new switch, the inside of the lever, the hole in the lever for the set screw and the set screw itself with acetone. I put some RED Loctite on the barrel of the switch - a drop on the flat and a drop on the side opposite of the flat. I put a drop on the screw and just snugged it down. Don't go full retard on the thing like we did before, LMAO!
I don't want that thing walking off ever again...so far, so good
NSR you forgot to tell me about the big bonus you get doing it this way!!! Two extra keys..... I couldn't believe it. At least we get something extra for the price they charge.
Only joking of course saying "you forgot to tell me"(i couldn't think of any other way to write it). But loved the bonus. Funny thing is I never really lock it anyways. But still want it working
#5569
04-11-2017 | 03:01 PM
Advanced
Joined: Aug 2016
Posts: 60
Likes: 9
From: Wisbech Cambs.