Last edit by: IB Advertising
Everything Breakout! Find out everything you need to know! Some topics include:
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
The Everything Breakout Thread
#4941
[QUOTE=tphykitt;15307100]Ill have to look those up! Thank you
I was corrected on the diameter of the fork tubes on the Breakout. They are actually 49 mm but there are some listed on eBay to fit it.
Have you considered a tank lift ? Its cheap and relatively easy to do. The mod would include apes, I assume, and there are various ways you can get the speedo to clear the tank, allowing for the lift.
Hmmm, i have not. Is the tank lift displayed in your picture? I don't want really high apes. Just a little more pull back.
Hmmm, i have not. Is the tank lift displayed in your picture? I don't want really high apes. Just a little more pull back.
Last edited by Duke 13; 07-11-2016 at 11:28 PM. Reason: Wrong info
#4942
[QUOTE=Duke 13;15314153]Nahh they are 49mm. This is so silly...who "corrected" you?
Last edited by HenryT; 07-10-2016 at 10:48 PM.
#4943
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,171
Received 1,940 Likes
on
1,116 Posts
#4944
#4945
If you are having this problem still, have the auto compression setting checked. Found mine was disabled (off) had the same symptoms. Service at dealer didn't even know it had it
The following users liked this post:
The Real John Doe (07-15-2016)
#4946
Some SE maps downloaded via SEPST have ACR disabled and dealers often don't pay attention to this setting. Probably these maps are used both for 96" and 103" engines and since 96" doesn't have ACR that's the reason why it's disabled. On 103" ACR enabled is even more important if you have a stage I,II etc. since it helps starting the bike up. What ChromeSpark correctly said might be the problem or at least part of it.
#4949
#4950