Last edit by: IB Advertising
Everything Breakout! Find out everything you need to know! Some topics include:
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
The Everything Breakout Thread
#2771
Deposit went down on the Breakout a week after the spill, wasn't going to let it stop me. It seemed like a good deal, hardly broken in and not much more than a new fatbob.
I have a twin bike TTS, first hit went on the Dyna, so when I get a free weekend I will complete a few tuning runs. Major thing is to get it richer for cooler running, especially with the 40c+ heat that's rapidly approaching. I will take the current tyres through this summer and then swap them over for the Night Dragons.
I have a twin bike TTS, first hit went on the Dyna, so when I get a free weekend I will complete a few tuning runs. Major thing is to get it richer for cooler running, especially with the 40c+ heat that's rapidly approaching. I will take the current tyres through this summer and then swap them over for the Night Dragons.
If you are tuning with narrow band o2 sensors then you'll only be able to tune for 14.6 and only in the cruise / idle areas of tables. Is your TTS compatible with the CVO 110?
Last edited by LA_Dog; 05-11-2015 at 09:00 AM.
#2772
Yeh I found a pair of these black Rizoma Circuit 851's on ebay lightly used for pretty cheap. Should be here this week. I occasionally browse the thunderbike.de site to see what's new with aftermarket parts. I could go broke ordering from that site- lots of cool stuff.
#2773
The mirrors are cool. Usually Rizoma is a bit expensive. Got some stuff of them at my racer.
Yes, some cool ideas. Have you seen their mod with the Nightrod Lamp & Cover on Breakout? I´ve also thought about a 9x21" rear wheel - I think it fits with the oem swingarm, so not "that much" to do here ;-)
Yes, some cool ideas. Have you seen their mod with the Nightrod Lamp & Cover on Breakout? I´ve also thought about a 9x21" rear wheel - I think it fits with the oem swingarm, so not "that much" to do here ;-)
#2774
Main thing I commonly hear is the SE255 cams run hot on that motor. The VE's in your tune are already configured rather lean especially in the lug, idle and cruise areas of the VE tables- HD does this on purpose for emissions and limiting power in these areas to reduce chance of "novice rider" engine damage during break-in. Also the AFR table is set for 14.6 in these same areas, which is great for economy and emissions but bad for heat.
If you are tuning with narrow band o2 sensors then you'll only be able to tune for 14.6 and only in the cruise / idle areas of tables. Is your TTS compatible with the CVO 110?
If you are tuning with narrow band o2 sensors then you'll only be able to tune for 14.6 and only in the cruise / idle areas of tables. Is your TTS compatible with the CVO 110?
Agreed on the Rizoma parts, some really smart parts, had a a tonne of it on my GSR, not cheap though
#2775
#2776
I'd call national cycle. See if they offer something that fits the bo fork width and diameter. They may have something and just don't list it for our bikes.
#2777
#2778
I want their rear fender
#2779
The mirrors are cool. Usually Rizoma is a bit expensive. Got some stuff of them at my racer.
Yes, some cool ideas. Have you seen their mod with the Nightrod Lamp & Cover on Breakout? I´ve also thought about a 9x21" rear wheel - I think it fits with the oem swingarm, so not "that much" to do here ;-)
Yes, some cool ideas. Have you seen their mod with the Nightrod Lamp & Cover on Breakout? I´ve also thought about a 9x21" rear wheel - I think it fits with the oem swingarm, so not "that much" to do here ;-)