Last edit by: IB Advertising
Everything Breakout! Find out everything you need to know! Some topics include:
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
The Everything Breakout Thread
#2662
#2664
Taking the leap!
Yo guys. Been lurking around here for the past year trying to learn as much as possible since I got my 14' Breakout. I love the bike and I've put a set of Bassani Turnout pipes, screaming eagle breather and Power Vision tuner on the bike. Beyond that its pretty much stock until now.
I'm gonna pull the trigger on a set of Ape hangers and a blackline dash conversion. I got the itch to get this bike in shape before the Laconia Bike week.
That being said, as the FNG, I'm asking for a little confirmation on my parts numbers and parts needed:
Blackline dash:
71340-11 - Console
72775-11 - Trim Insert
71576-08A - Tubing (x2)
60900001 - Top Plate
Apes:
Going with Burleigh Bars Highball 14" (not sure if I should go 1 1/4" or 1 1/2")
55900026 - CVO lower riser
55900027 - CVO Upper riser
New grips (Arlen Ness)
New mirrors (TBD)
Magnum shield clutch: 322210HE (+6 66 11/16")
Magnum shield throttle: 33256 (+6 36 5/8")
Magnum shield idle: 34256 (+6 36 5/8")
Magnum shield ABS Lower: AS37003
Magnum shield ABS Upper: AS37934 (+6)
I'm unclear about what wire harness setup to get for this. I'll keep the turn signals on the bars for now.
I'm shooting for this guy's look:
Any help would be much appreciated. I've always wrenched on my own bikes but I've never worked on a Harley electrical so tips are great.
Thanks guys
The following users liked this post:
klinton994 (12-06-2017)
#2665
Most tend to overlook the seat as the biggest area of available position adjustment. If you take off your seat you'll see just how much it is pushing you up and forward. Upholstery shops have the better gel foam that is half the thickness of the stock seat foam and same if not better level of comfort. I have never bought an aftermarket seat- it's about a quarter to third of the cost to have a shop reshape the stock seat and use your original cover, and even if you decide on nicer cover material it is still going to be half the price of the aftermarket seat.
[/URL]
Yo guys. Been lurking around here for the past year trying to learn as much as possible since I got my 14' Breakout. I love the bike and I've put a set of Bassani Turnout pipes, screaming eagle breather and Power Vision tuner on the bike. Beyond that its pretty much stock until now.
I'm gonna pull the trigger on a set of Ape hangers and a blackline dash conversion. I got the itch to get this bike in shape before the Laconia Bike week.
That being said, as the FNG, I'm asking for a little confirmation on my parts numbers and parts needed:
Blackline dash:
71340-11 - Console
72775-11 - Trim Insert
71576-08A - Tubing (x2)
60900001 - Top Plate
Apes:
Going with Burleigh Bars Highball 14" (not sure if I should go 1 1/4" or 1 1/2")
55900026 - CVO lower riser
55900027 - CVO Upper riser
New grips (Arlen Ness)
New mirrors (TBD)
Magnum shield clutch: 322210HE (+6 66 11/16")
Magnum shield throttle: 33256 (+6 36 5/8")
Magnum shield idle: 34256 (+6 36 5/8")
Magnum shield ABS Lower: AS37003
Magnum shield ABS Upper: AS37934 (+6)
I'm unclear about what wire harness setup to get for this. I'll keep the turn signals on the bars for now.
I'm shooting for this guy's look:
Any help would be much appreciated. I've always wrenched on my own bikes but I've never worked on a Harley electrical so tips are great.
Thanks guys
Yo guys. Been lurking around here for the past year trying to learn as much as possible since I got my 14' Breakout. I love the bike and I've put a set of Bassani Turnout pipes, screaming eagle breather and Power Vision tuner on the bike. Beyond that its pretty much stock until now.
I'm gonna pull the trigger on a set of Ape hangers and a blackline dash conversion. I got the itch to get this bike in shape before the Laconia Bike week.
That being said, as the FNG, I'm asking for a little confirmation on my parts numbers and parts needed:
Blackline dash:
71340-11 - Console
72775-11 - Trim Insert
71576-08A - Tubing (x2)
60900001 - Top Plate
Apes:
Going with Burleigh Bars Highball 14" (not sure if I should go 1 1/4" or 1 1/2")
55900026 - CVO lower riser
55900027 - CVO Upper riser
New grips (Arlen Ness)
New mirrors (TBD)
Magnum shield clutch: 322210HE (+6 66 11/16")
Magnum shield throttle: 33256 (+6 36 5/8")
Magnum shield idle: 34256 (+6 36 5/8")
Magnum shield ABS Lower: AS37003
Magnum shield ABS Upper: AS37934 (+6)
I'm unclear about what wire harness setup to get for this. I'll keep the turn signals on the bars for now.
I'm shooting for this guy's look:
Any help would be much appreciated. I've always wrenched on my own bikes but I've never worked on a Harley electrical so tips are great.
Thanks guys
Read about 10 pages back, it is here... somewhere.. :P
Welcome to the forum post up some pics of your scoot-
Last edited by ChickinOnaChain; 08-19-2015 at 06:19 PM.
#2670