Blackline Todd's cycle Bars
#1
Blackline Todd's cycle Bars
I just ordered Todd's cycles strip bars. And I was wondering if anyone else has these or knows of cable lengths that will work. I've done some searching but haven't seen a definite answer.
I'm replacing all the cables, brake clutch throttle and idle. And recommendations on a vendor for this would be appreciated as well. I've been looking at magnumshielding.com.
Thanks everyone.
I'm replacing all the cables, brake clutch throttle and idle. And recommendations on a vendor for this would be appreciated as well. I've been looking at magnumshielding.com.
Thanks everyone.
#2
#3
#6
I have them on my blackline. Best mod ive done, you'll love them. Installed the bars then measured for lengths. Went with +6 all around. Worked great for me. Ive read some guys saying +3 will work but that seemed too tight for my measurements. I think a +5 would be the shortest I would recommend. Also found that for the front brake line using a 90degree banjo at the bars and a 45 degree at the caliper helps route the cables tight to the bars and away from curving out towards the headlight. Had it the opposite way first and my brake line ran right towards the light instead of down the bars and forks, im **** and it looked like **** imo. Good luck
#7
Trending Topics
#8