Mapping
#1
#2
I have the TTS MasterTune myself but if I would buy today I give the Power Vision a good hard look!
Check it out on Fuel Moto's site. (he is a sponsor on here)
http://www.fuelmotousa.com
They will load it with the appropriated map for your bike, and the PV gives you plenty of opportunity to fine tune further.
Check it out on Fuel Moto's site. (he is a sponsor on here)
http://www.fuelmotousa.com
They will load it with the appropriated map for your bike, and the PV gives you plenty of opportunity to fine tune further.
#3
You need to do some research by reading the thousand or so threads on this topic... the answer is "it depends" and you have to fill in the blanks to determine the right choice. If you're never going to make any other changes (including a big one in the elevation that you are riding at) then your three mentioned choices will work just fine. The Power Commander has some adjustability so it is somewhat better and can be made to work really well with a dyno until you climb a mountain or ride by the beach (depending upon where you started) unless you have an autotune version.
#5
There are a couple of ways you can go...and they have been discussed ad nuseum all over this forum and others.
It comes down to what YOU want to do. One thing to consider is to have the dealer do the stage 1 flash, then you can add any unit you want and fine tune from there, but if something goes wrong with the unit you choose, you are still riding a bike that has the factory flash for the pipes and breather and not potentially doing damage by running too lean.
It comes down to what YOU want to do. One thing to consider is to have the dealer do the stage 1 flash, then you can add any unit you want and fine tune from there, but if something goes wrong with the unit you choose, you are still riding a bike that has the factory flash for the pipes and breather and not potentially doing damage by running too lean.
#6
I've not done any Engine/Cam work.......have V&H exhaust 2x2 and an air intake and my fuel pak has been working great for 4+ years.
#7
Trending Topics
#8
Short answer is if you are not going to do any Engine/Cam work in the future and you have V&H Exhaust then I would get the Fuel Pak and use their map......if you answer yes to Engine/Cam work in the future you better do some more reading.
I've not done any Engine/Cam work.......have V&H exhaust 2x2 and an air intake and my fuel pak has been working great for 4+ years.
I've not done any Engine/Cam work.......have V&H exhaust 2x2 and an air intake and my fuel pak has been working great for 4+ years.
#9
#10