Thanks Jake. We must have the same vintage ***** since it reminds me of sitting on a brick! Good to know you recommend the Mustang, I appreciate the info.
LOL sounds about right! Not the best looking seat but it is comfortable, and I can't see it while I'm sitting on it!
I don't have a slim, but checking out this thread to look at all the pics. I be noticed shortshots or "groundpounders" look fantastic on those things!!!
Trying to keep the stock look. Haven't had it on a Dyno yet should be around 140hp/140tq. Progressive mono cartridges, shotgun air ride,relocated the coil,led head light with directionals,flush gas cap and gas gauge,risers,seat,180/65 rear tire,increased the exhaust pipe size still fits under the Vance and Hines heat shields,power vision with Target tune,changed leds in speedometer,national cycle wave windshield Led headlight. Amber LEDs in head light are wired into the directionals.national cycle wave windshield.
and what ever I forgot to mention,
Trying to keep the stock look. Haven't had it on a Dyno yet should be around 140hp/140tq. Progressive mono cartridges, shotgun air ride,relocated the coil,led head light with directionals,flush gas cap and gas gauge,risers,seat,180/65 rear tire,increased the exhaust pipe size still fits under the Vance and Hines heat shields,power vision with Target tune,changed leds in speedometer,national cycle wave windshield Led headlight. Amber LEDs in head light are wired into the directionals.national cycle wave windshield.
and what ever I forgot to mention,
Did you need to change rim or do any modifications to the fender to fit that 180/65 rear tire?
Did you need to change rim or do any modifications to the fender to fit that 180/65 rear tire?
I cut the rear fender in 3 pieces and widened it 1,5'. This is how I cut it. Cut up my vancs and Hines super radius pipes. Increased the size to 2" and 2.125 ". Widened the fender 1.25". I also changed the rim f tom 3 to 4.5". The rim was on eBay. I also made spacers to move the fender struts out 3/4". I did it this way so I didn't have to buy another seat. It's only 1 year old.
Last edited by 98fxdheadaches; 06-21-2020 at 01:25 AM.
I cut the rear fender in 3 pieces and widened it 1,5'. This is how I cut it. Cut up my vancs and Hines super radius pipes. Increased the size to 2" and 2.125 ". Widened the fender 1.25". I also changed the rim f tom 3 to 4.5". The rim was on eBay. I also made spacers to move the fender struts out 3/4". I did it this way so I didn't have to buy another seat. It's only 1 year old.
Wow great job. Very well done. Thanks for the info and pics.
New Zombie Performance Titty Bars painted white, new headlight from Thunderbike Germany, new 2007 Road King wheels and a beautiful sunny weather here in Beaujolais, France 🤠🤠🤠
05-31-2020 | 05:32 PM
