Softtail SLIM - Let's see the Pics!!!
#4421
#4423
#4425
The following 3 users liked this post by keener3rd:
#4426
2016 Flss 117
Trying to keep the stock look. Haven't had it on a Dyno yet should be around 140hp/140tq. Progressive mono cartridges, shotgun air ride,relocated the coil,led head light with directionals,flush gas cap and gas gauge,risers,seat,180/65 rear tire,increased the exhaust pipe size still fits under the Vance and Hines heat shields,power vision with Target tune,changed leds in speedometer,national cycle wave windshield
Led headlight. Amber LEDs in head light are wired into the directionals.national cycle wave windshield.
and what ever I forgot to mention,
Led headlight. Amber LEDs in head light are wired into the directionals.national cycle wave windshield.
and what ever I forgot to mention,
The following 6 users liked this post by 98fxdheadaches:
baz70 (06-26-2020),
betho61 (07-13-2020),
Bozoskeletonz (07-25-2022),
Guglielmo Marconi (06-19-2020),
JakeC7R (06-19-2020),
and 1 others liked this post.
#4427
Trying to keep the stock look. Haven't had it on a Dyno yet should be around 140hp/140tq. Progressive mono cartridges, shotgun air ride,relocated the coil,led head light with directionals,flush gas cap and gas gauge,risers,seat,180/65 rear tire,increased the exhaust pipe size still fits under the Vance and Hines heat shields,power vision with Target tune,changed leds in speedometer,national cycle wave windshield
Led headlight. Amber LEDs in head light are wired into the directionals.national cycle wave windshield.
and what ever I forgot to mention,
Led headlight. Amber LEDs in head light are wired into the directionals.national cycle wave windshield.
and what ever I forgot to mention,
Did you need to change rim or do any modifications to the fender to fit that 180/65 rear tire?
The following users liked this post:
keener3rd (06-21-2020)
#4428
Cut up my vancs and Hines super radius pipes. Increased the size to 2" and 2.125 ".
Widened the fender 1.25". I also changed the rim f tom 3 to 4.5". The rim was on eBay. I also made spacers to move the fender struts out 3/4". I did it this way so I didn't have to buy another seat. It's only 1 year old.
Last edited by 98fxdheadaches; 06-21-2020 at 01:25 AM.
The following users liked this post:
JakeC7R (06-21-2020)
#4429
I cut the rear fender in 3 pieces and widened it 1,5'. This is how I cut it.
Cut up my vancs and Hines super radius pipes. Increased the size to 2" and 2.125 ".
Widened the fender 1.25". I also changed the rim f tom 3 to 4.5". The rim was on eBay. I also made spacers to move the fender struts out 3/4". I did it this way so I didn't have to buy another seat. It's only 1 year old.
Cut up my vancs and Hines super radius pipes. Increased the size to 2" and 2.125 ".
Widened the fender 1.25". I also changed the rim f tom 3 to 4.5". The rim was on eBay. I also made spacers to move the fender struts out 3/4". I did it this way so I didn't have to buy another seat. It's only 1 year old.
The following users liked this post:
98fxdheadaches (06-22-2020)
#4430
The following 3 users liked this post by Bluegrass Phil: