Softtail SLIM - Let's see the Pics!!!
#3021
Purchased my Slim on 5-23-15 and have 1500 miles on it so far, first street bike! Love it so far! I've read most of the posts on this thread and wanted a Freight Train Nacelle and pull back risers. I made some 1" diameter aluminum spacers to go under the risers and used 3/4" longer bolts so I didn't have to grind any clearance on the nacelle. It almost looks like the risers are bolted on top of the nacelle, pictures attached. I've also installed Cobra slip on mufflers, S&S Stealth Air Cleaner, Vance & Hines FP3 Tuner, Mustang Seat, Bowman Welding Sissy Bar, HD Quick Detach Windshield and HD Passenger Foot Boards. Thanks for all the inspiration on this thread!!!
#3022
Purchased my Slim on 5-23-15 and have 1500 miles on it so far, first street bike! Love it so far! I've read most of the posts on this thread and wanted a Freight Train Nacelle and pull back risers. I made some 1" diameter aluminum spacers to go under the risers and used 3/4" longer bolts so I didn't have to grind any clearance on the nacelle. It almost looks like the risers are bolted on top of the nacelle, pictures attached. I've also installed Cobra slip on mufflers, S&S Stealth Air Cleaner, Vance & Hines FP3 Tuner, Mustang Seat, Bowman Welding Sissy Bar, HD Quick Detach Windshield and HD Passenger Foot Boards. Thanks for all the inspiration on this thread!!!
Nice ! Welcome to the HD Forum !!
#3023
Purchased my Slim on 5-23-15 and have 1500 miles on it so far, first street bike! Love it so far! I've read most of the posts on this thread and wanted a Freight Train Nacelle and pull back risers. I made some 1" diameter aluminum spacers to go under the risers and used 3/4" longer bolts so I didn't have to grind any clearance on the nacelle. It almost looks like the risers are bolted on top of the nacelle, pictures attached. I've also installed Cobra slip on mufflers, S&S Stealth Air Cleaner, Vance & Hines FP3 Tuner, Mustang Seat, Bowman Welding Sissy Bar, HD Quick Detach Windshield and HD Passenger Foot Boards. Thanks for all the inspiration on this thread!!!
Nice work on those risers. Looks factory. I like the color too.
#3025
Airplaneguy, did you have to relocate anything for the sissy bar? Doesn't look it from the angle, but just checking. Need to get one for my Slim and balking at the cost to relocate the turn signals and license plate with HD kits.
LOVE the color. I so badly wanted Sand Camp Denim but there were none in New England to be had…
LOVE the color. I so badly wanted Sand Camp Denim but there were none in New England to be had…
#3026
Airplaneguy, did you have to relocate anything for the sissy bar? Doesn't look it from the angle, but just checking. Need to get one for my Slim and balking at the cost to relocate the turn signals and license plate with HD kits.
LOVE the color. I so badly wanted Sand Camp Denim but there were none in New England to be had…
LOVE the color. I so badly wanted Sand Camp Denim but there were none in New England to be had…
#3027
Thanks! I really didn't want to grind on the nacelle and I wanted the pullback risers so I could sit more upright. It worked out pretty well. I may make a cover to fill in the rest of the opening in the nacelle.
You really have to see the color in the sun to appreciate it. It looks like it has pearl and metal flake in it in the sun. I love Vivid Black Harleys but everyone has one! The only other color I would have considered would have been Black Denim but it isn't available on the Slim anymore.
You really have to see the color in the sun to appreciate it. It looks like it has pearl and metal flake in it in the sun. I love Vivid Black Harleys but everyone has one! The only other color I would have considered would have been Black Denim but it isn't available on the Slim anymore.
#3028
The wiring for the tail lights runs between the rear fender and the fender supports. The sissy bar also fits between the fender and the fender supports. There is nothing you have to relocate to install the sissy bar. Just follow the instructions Bowman Welding provides and you should be fine. I used a heat gun to remove the reflectors. It fits tight on the fender but I didn't have any scratches using dish soap as a lubricant following the instructions. I bought the Buck Fifty which doesn't have any cross bars or pad brackets and is 12 inches above the fender. They make a great product!
#3030
The following users liked this post:
clrawleigh (08-15-2017)