Clean Rear Fender Options (2010 FatBoy LO)
#1
Clean Rear Fender Options (2010 FatBoy LO)
Been learking for a while and dont post much but I am calling for some help on rear fender options.
My goal to have a clean rear fender. I have moved the tail light and the license plate to the swingarm. I will remove my turn signals for some much smaller ones. I will have to replace the rear fender anyways (damaged) so this opens me up for options. The bike is lowered in the rear if that matters I dont really prefer a bobbed off style fender vs. a tail dragger as long as its clean... Also I have a Lepera Bare Bones seat and I would like to keep it if possible because I went through 3 or 4 seats before I decided on this one because it sets the lowest I have found...
Roland Sands or the Heartland fender set up is nice but I am waiting on RSD to call me back about my seat working with thier kit and the Heartland does not seem to work with my model and year bike...
I would also consider a longer than stock fender like a Klock Werks as long as its steel and no holes but I have also left them a message waiting on a responce...
One other requirement is I must be able to have a rear seat and want this removable (no hard I know) because my girl likes to ride too. It doesnt have to be a large seat as she is pretty small.
I have looked through a TON of pictures on here and it doesnt seem like anyone has replaced thier rear fender on the newer bikes yet... Ordering a new factory fender is not an option either becuase the dealer told me they are 30 to 45 days out and I have a ride I need to go on 4th of July...
Any suggestions? Pictures would be nice with your suggestions as well. Thank you in advance. JC
My goal to have a clean rear fender. I have moved the tail light and the license plate to the swingarm. I will remove my turn signals for some much smaller ones. I will have to replace the rear fender anyways (damaged) so this opens me up for options. The bike is lowered in the rear if that matters I dont really prefer a bobbed off style fender vs. a tail dragger as long as its clean... Also I have a Lepera Bare Bones seat and I would like to keep it if possible because I went through 3 or 4 seats before I decided on this one because it sets the lowest I have found...
Roland Sands or the Heartland fender set up is nice but I am waiting on RSD to call me back about my seat working with thier kit and the Heartland does not seem to work with my model and year bike...
I would also consider a longer than stock fender like a Klock Werks as long as its steel and no holes but I have also left them a message waiting on a responce...
One other requirement is I must be able to have a rear seat and want this removable (no hard I know) because my girl likes to ride too. It doesnt have to be a large seat as she is pretty small.
I have looked through a TON of pictures on here and it doesnt seem like anyone has replaced thier rear fender on the newer bikes yet... Ordering a new factory fender is not an option either becuase the dealer told me they are 30 to 45 days out and I have a ride I need to go on 4th of July...
Any suggestions? Pictures would be nice with your suggestions as well. Thank you in advance. JC
#3
Fireman1501 can custom stretch and smooth your stock fender. Here's a pic of a newer (200mm) fatboy fender he did recently. This allows you to get a custom look and keeps the fitment and ability to use any seat made for the your bike. By the way, I don't make anything off these things. He's a buddy of mine and does good work.
#4
Depending on how bad your rear fender is damaged we may be able to still use it to custom make it to your needs... The bike above is one I did last month and I stretched it 9" to get the look he wanted and I also tucked it towards the tire to give it the cleaner look with the wheel instead of the duck tail look. PM me or call or text me at 903-456-7913.. I can sure help point ya in the right direction..
#6
Fireman1501 can custom stretch and smooth your stock fender. Here's a pic of a newer (200mm) fatboy fender he did recently. This allows you to get a custom look and keeps the fitment and ability to use any seat made for the your bike. By the way, I don't make anything off these things. He's a buddy of mine and does good work.
#7
Using my stock fender is not an option. It is damaged beyond fixing even to its back to stock form. That's why I have looked at on the self solutions. Again, remember I have a ride July 4th so building a custom fender isn't exactly the quickest option either. And Harley can't even get me a stock fender by then.
Thanks for the inpit, please keep lithe options coming. JC
Thanks for the inpit, please keep lithe options coming. JC
Trending Topics
#9
#10
Whos bike is this? do you happen to know the color code of this paint? thanks
Fireman1501 can custom stretch and smooth your stock fender. Here's a pic of a newer (200mm) fatboy fender he did recently. This allows you to get a custom look and keeps the fitment and ability to use any seat made for the your bike. By the way, I don't make anything off these things. He's a buddy of mine and does good work.