Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

night train parts collecting for futer 200 conv.

Thread Tools
 
Search this Thread
 
  #1  
Old 05-17-2012, 08:47 AM
tdpb2008's Avatar
tdpb2008
tdpb2008 is offline
Intermediate
Thread Starter
Join Date: May 2012
Location: Pennsylvania
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default night train parts collecting for futer 200 conv.

i want to do a 200 rear conversion this upcoming winter so i am now shopping for parts i will need. i have a 03 night train with the skinny rear...i found a 08 fatboy wheel 17x6 and was wondering if it would work?
from what ive read i will need a 06 soft tail swingarm that is used with a 200mm tire and so my caliper will work. is this right?

i like the heartland and rolland sands fender but she likes to ride and i want to keep my stock seats and use a detatchable sissy bar so i was thinking of chopping a fat boy fender?

any input would be appreciated
thanks in advance
 
  #2  
Old 05-17-2012, 08:56 AM
suiii15's Avatar
suiii15
suiii15 is offline
Road Captain
Join Date: Jul 2011
Location: Rhode Island
Posts: 569
Received 0 Likes on 0 Posts
Default

You are going to need to get the narrower belt from one of the later model bikes and the pulley as well. You may have issues with your frame horns as well, but I'm not certain. I have an 03 night train as well and am currently doing the same mod, though I went a different route. Got most of my intel from here.

https://www.hdforums.com/forum/softa...l?ref=esp-link
 
  #3  
Old 05-17-2012, 10:53 AM
tdpb2008's Avatar
tdpb2008
tdpb2008 is offline
Intermediate
Thread Starter
Join Date: May 2012
Location: Pennsylvania
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

going to chop the frame horns

i may just buy all 06 night train/softail parts then everything should line up right
 
  #4  
Old 05-17-2012, 10:56 AM
tdpb2008's Avatar
tdpb2008
tdpb2008 is offline
Intermediate
Thread Starter
Join Date: May 2012
Location: Pennsylvania
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

is the 08 fatboy wheel the same as say the 07-09 night train wheel...axle diameter,pulley and rotor
 
  #5  
Old 05-17-2012, 11:05 AM
suiii15's Avatar
suiii15
suiii15 is offline
Road Captain
Join Date: Jul 2011
Location: Rhode Island
Posts: 569
Received 0 Likes on 0 Posts
Default

Yeah, it's the 200mm set up as well.
 
  #6  
Old 05-17-2012, 11:05 AM
suiii15's Avatar
suiii15
suiii15 is offline
Road Captain
Join Date: Jul 2011
Location: Rhode Island
Posts: 569
Received 0 Likes on 0 Posts
Default

If you do go that route swing arm from newer bike will be needed as well.
 
  #7  
Old 05-17-2012, 11:26 AM
sagebrush1976's Avatar
sagebrush1976
sagebrush1976 is offline
Road Master
Join Date: May 2010
Location: Peach Bottom, PA
Posts: 1,124
Likes: 0
Received 15 Likes on 13 Posts
Default

Originally Posted by tdpb2008
is the 08 fatboy wheel the same as say the 07-09 night train wheel...axle diameter,pulley and rotor
07 has 3/4" axle and 08+ have 25mm axle.
 
  #8  
Old 05-17-2012, 11:39 AM
sagebrush1976's Avatar
sagebrush1976
sagebrush1976 is offline
Road Master
Join Date: May 2010
Location: Peach Bottom, PA
Posts: 1,124
Likes: 0
Received 15 Likes on 13 Posts
Default

Originally Posted by tdpb2008
ive read i will need a 06 soft tail swingarm that is used with a 200mm tire and so my caliper will work. is this right?
I do know that 06 FX softails had a lot of unique parts specific to that model year. The rear wheel has a different hub width then the 07's and the drive pulley is also unique to 06's. I've swapped 07 wheels on to my 06 FXST so I know all about this. There was another guy on here that just did the same swap on his 05 Train. His name is Bryce05 I think. He had a lot of useful info in his write up. I'm sure he could guide you in the right direction. If you go with the 06 rear wheel let me know.....I have my stock wheel and almost new tire setting in the garage.
 
  #9  
Old 05-17-2012, 01:26 PM
tdpb2008's Avatar
tdpb2008
tdpb2008 is offline
Intermediate
Thread Starter
Join Date: May 2012
Location: Pennsylvania
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by sagebrush1976
I do know that 06 FX softails had a lot of unique parts specific to that model year. The rear wheel has a different hub width then the 07's and the drive pulley is also unique to 06's. I've swapped 07 wheels on to my 06 FXST so I know all about this. There was another guy on here that just did the same swap on his 05 Train. His name is Bryce05 I think. He had a lot of useful info in his write up. I'm sure he could guide you in the right direction. If you go with the 06 rear wheel let me know.....I have my stock wheel and almost new tire setting in the garage.
i may just do that seems like its going to be much easier if i go with an 06 wheel...pm me a price
 
  #10  
Old 05-17-2012, 01:34 PM
tdpb2008's Avatar
tdpb2008
tdpb2008 is offline
Intermediate
Thread Starter
Join Date: May 2012
Location: Pennsylvania
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

a 07 fatboy fender is used with a 200mm rear?
and i can use that fender with 07+ night train struts right? found one for 80 bucks new neer me on craigslist and will be perfect for my 200 conv. this winter if it will work
 


Quick Reply: night train parts collecting for futer 200 conv.



All times are GMT -5. The time now is 02:21 PM.