guys i come across this exhaust i like the look of it and is 5 step design ,looks like is gonna perform good all made is USA,I need your feedback if you have this pipe
check out the website http://www.freedomperform.com/softai...nion-2-into-1/
by the way i was set on the bassani road range,but now i am at neutral again,i really dig this pipe,i wish someone come in with experience and fill as in on the pipe.
Nice deep tone, deeper than a D&D which it appears to be designed after. I have a crappy cel phone vid with sound on our FB page. Doesn't really do it justice but you can sorta hear it. Bike is an 05 Heritage with an S&S 95in big bore, 585 cams, 110hp.
I have look at the new pp but I found out is not good for stock engines,lose TQ at low revs.
Dont know who said that, just recently one member posted his dyno sheets with stg1 and cams and D&D's.
Then changed out to V&H's new PP and though overall TQ was 3#'s less, the V&H's actually make better TQ under 3k that his D&D's did, almost 10% better with pipe change only.