I like what you did there...a lil more info be nice. Thinkin same setup on mine and you could save me alot of time. *grinz
I had to Weld and Grind down the Original license plate Holes
and I also Welded and ground down 4 of the mounting Holes
to get it to sit the way I wanted it ... my neighbor is the Welder
and he works for BEER so that worked out real good ...
He also does some Bike Building .
The original tail light hole is abour 3 7/8 in. wide , so I got the
Wide Tomstone tail light which is 4 1/4 in Wide that will cover the Hole , got mine EBay but Drag Specialties and JP has-um .
you will need to get a Lit license plate frame also I am usin a LED
Hope this Helps ,
You will run into a few Snags but nuttin you can't work out
I'm about to do the same thing to my Train. I got. 2006 FatBoy fender from ebay....I didn't know the regular Tombstone wouldn't cover the hole! That SUCKS! I already bought a regular black Tombstone but it hasn't came in yet. Guess I'll have to weld up the stock hole or get another tail light.
If your mounting Hole is a little smaller than 3 7/8 in. then you will be OK ,, Drag Specialties also has a Adapter plate you can put in the Hole 12 Bucks , I bought one but it didn't work , So I make one..
Well dennyo, my tombstone tail light came in and it WON'T cover the stock hole. That SUCKS!!! I might just weld a filler plate over stock hole. Haven't decided yet. I wish you would have started this thread before I ordered the tail light. Hahaha!