Need help spending Money
#21
There are plenty of threads on this forum with discriptions and video with sound.
Ok, I'll throw ya one:
https://www.hdforums.com/forum/engin...t-systems.html
Scroll through this whole thread there are lots of sound clips with different pipes on different setups.
The rest of your homework up to you.
Ok, I'll throw ya one:
https://www.hdforums.com/forum/engin...t-systems.html
Scroll through this whole thread there are lots of sound clips with different pipes on different setups.
The rest of your homework up to you.
Last edited by Joker_Hal; 02-10-2012 at 01:17 AM.
#23
#24
BLANK CHECK!! OOoooo..boy. I'm sure we could come up with one hell of a list for ya but that would depend on how many digits that check could handle, LOL.
But to start, I'm runnin a PC and Samson street sweepers they give a good deep throaty sound, I've got V&H on the heritage but I like the samsons a little more. While yer at it you might as well do a high flow air cleaner.
Just sayin.
But to start, I'm runnin a PC and Samson street sweepers they give a good deep throaty sound, I've got V&H on the heritage but I like the samsons a little more. While yer at it you might as well do a high flow air cleaner.
Just sayin.
Last edited by shooker; 02-10-2012 at 07:06 PM.
#25
Well here is the list of mods. Think I've done a good job of spending the money so far.
Custom Paint Job
16 inch windshield
LED Head Light
Mustang Wide Regal Touring Seat
Sissy bar/Passenger Backrest Luggage rack
CB radio/driver & passenger intercom
Rear blinkers, converted to run/turn/brake lights
Quarter-Turn Throttle System w/throttle rocker
Highway bars w/50w driving lights
Digital speedometer & tachometer
Throw over saddle bags w/brackets
Bad boy Airhorn
Rear view mirrors w/gold eagle engraving
Custom engraved left derby cover
Custom engraved air filter plate
Custom engraved oil filter cover
Lay-down license plate holder
Eagle Head Horn Cover
Next stop is exhaust, some type of PC and/or air intake.
Custom Paint Job
16 inch windshield
LED Head Light
Mustang Wide Regal Touring Seat
Sissy bar/Passenger Backrest Luggage rack
CB radio/driver & passenger intercom
Rear blinkers, converted to run/turn/brake lights
Quarter-Turn Throttle System w/throttle rocker
Highway bars w/50w driving lights
Digital speedometer & tachometer
Throw over saddle bags w/brackets
Bad boy Airhorn
Rear view mirrors w/gold eagle engraving
Custom engraved left derby cover
Custom engraved air filter plate
Custom engraved oil filter cover
Lay-down license plate holder
Eagle Head Horn Cover
Next stop is exhaust, some type of PC and/or air intake.
Last edited by Joker_Hal; 03-01-2012 at 07:44 PM.
#29
Not the style I'm looking at. While they look good on your ride, don't think they will on mine.
I decided to replace the pipes because of all the bluing on them. I installed a chip that makes the bike run cooler so I'm not concerned about the new pipes turning. I haven't decided yet on what to get, but I'm looking at the 2-in-1 that goes to or past the rear axle.
I decided to replace the pipes because of all the bluing on them. I installed a chip that makes the bike run cooler so I'm not concerned about the new pipes turning. I haven't decided yet on what to get, but I'm looking at the 2-in-1 that goes to or past the rear axle.