Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

New Vibration! Anybody got any ideas?

Thread Tools
 
Search this Thread
 
  #1  
Old 09-18-2011, 10:53 PM
av8or's Avatar
av8or
av8or is offline
Road Master
Thread Starter
Join Date: Jul 2009
Posts: 1,052
Received 12 Likes on 10 Posts
Default New Vibration! Anybody got any ideas?

Just started getting a strange vibration. Not under power, and not under compression. Just that little spot in-between. I checked the engine mount bolts and they were good. It kinda feels like it's maybe in the primary as I feel it more on the left floorboard than the right. The bike is stock other than stage 1 with tts mastertune 18,500 miles. Any thoughts would be appreciated.
 
  #2  
Old 09-19-2011, 08:16 AM
cwsharp's Avatar
cwsharp
cwsharp is offline
Stellar HDF Member
Join Date: Mar 2006
Location: Utah
Posts: 2,395
Received 152 Likes on 112 Posts
Default

Sometimes when you go around a corner a vibration is coming from the brake rotors.

If your rear wheel recently was removed and installed the alignment may have changed enough to make your belt rub. There is a debate as to whether the belt should favor the right or the left side of the rear pulley.

Some have had issues with wheel bearings early in the bike's life but I have never seen that. Put each wheel up in the air and spin it and see what it feels like. Keep your hand on the wheel and put some sideways force on it.

The more you ride the more you feel and hear stuff.

Or, "it's a Harley". Ride it till it breaks.

C#
 
  #3  
Old 09-19-2011, 10:29 AM
tmitchellof PG's Avatar
tmitchellof PG
tmitchellof PG is offline
Elite HDF Member
Join Date: Sep 2006
Location: Punta Gorda,FL
Posts: 3,718
Likes: 0
Received 9 Likes on 9 Posts
Default

Have you made sure your exhaust isn't touching your frame?
Tom
 
  #4  
Old 09-19-2011, 10:32 AM
DR. V-TWIN's Avatar
DR. V-TWIN
DR. V-TWIN is offline
Former Sponsor
Join Date: Jan 2009
Location: Los Angeles, CA
Posts: 19,364
Likes: 0
Received 39 Likes on 38 Posts
Default

Heat shields, loose compensationg sprocket? Riser bolts from the triple tree? Judging from the left side by the primary I am guess loose compensator sprocket. Also check your floorboard bolts.

Drew
 
  #5  
Old 09-19-2011, 12:02 PM
pnw_hd_rider's Avatar
pnw_hd_rider
pnw_hd_rider is offline
Cruiser
Join Date: Jul 2011
Location: Pacific Northwest
Posts: 210
Likes: 0
Received 1 Like on 1 Post
Default

Since you feel it on the primary side, I'd check the compensator sprocket (especially since it doesn't do it under load). It's not really 'common' but more common than it should be that they come loose. Sometimes the nut is loose but I've heard of cases where the sprocket was loose even with the nut torqued down and needed to be shimmed.
 
  #6  
Old 09-19-2011, 03:55 PM
oct1949's Avatar
oct1949
oct1949 is offline
Club Member
Join Date: May 2007
Location: Northeast of Indy..
Posts: 145,895
Received 819 Likes on 805 Posts
Default

are U still under warranty? if so just take it in.
 
  #7  
Old 09-23-2011, 11:01 AM
av8or's Avatar
av8or
av8or is offline
Road Master
Thread Starter
Join Date: Jul 2009
Posts: 1,052
Received 12 Likes on 10 Posts
Default

Thanks for all the responses. Been outta town so haven't checked the boards for a few days. The scoot is not under warranty, so whatever if anything is going on is my baby. My thought is it's the compensator, but don't know. It's definitely a new vibration. I'll be checking it out this weekend when I get home.
 
  #8  
Old 09-23-2011, 11:08 AM
soft 02's Avatar
soft 02
soft 02 is offline
Seasoned HDF Member
Join Date: Mar 2007
Location: TOAK western branch
Posts: 66,948
Received 4,571 Likes on 2,889 Posts
Default

IPB? Main shaft bearing? Compensator. Bad drive belt. Primary chain adjuster. Out of balance wheel. Handle bar bushings. Nut behind the bars.
 
  #9  
Old 09-23-2011, 03:18 PM
TURQ's Avatar
TURQ
TURQ is offline
Tourer
Join Date: Nov 2010
Location: KENTUCKY
Posts: 365
Received 9 Likes on 7 Posts
Default

heh, heh, heh...he said nut behind the bars...heh, heh, heh.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Edgee
Primary/Transmission/Driveline/Clutch
18
07-21-2018 08:40 AM
Hades02
Touring Models
14
09-12-2017 08:27 AM
F86
Dyna Glide Models
34
03-30-2017 09:35 AM
biil9
Touring Models
9
02-08-2014 04:04 PM
DENGUY
Sportster Models
5
02-22-2010 06:07 AM



Quick Reply: New Vibration! Anybody got any ideas?



All times are GMT -5. The time now is 02:38 AM.