Heritage seat holding water
#1
Heritage seat holding water
Has anyone had a problem with the Heritage seat holding water ? The seat on my 2010 Heritage is not waterproof and holds water like a sponge. If the bike gets caught in the rain or after washing the bike, the water goes through the seams into the padding and when you sit on it, the seat expelles water like sitting on a twelve inch sponge. Never had a seat do this in over forty years of riding. They were always waterproof.
#3
#4
#5
#6
As I said, over forty years of riding with many Harleys and many different seats and never seen this problem. I'm talking massive amounts of water soaked up in just a few minutes of sitting in the rain or washing the bike. Went to Johnstown Pa. Thunder In The Valley over the weekend ( showers included ) and had a wet *** the whole time.
#7
Vinyl seats are known to leak through the stitching depending on how the stitching is set up. Leather seats will conform to the holes made by the stitches and squeeze them back shut and reseal them.
To seal the seams, use a spray wax like Pledge on the seat and rub it in. Problem is that this can make the seat slippery. One I've done before is to find a clear paste wax and just rub it into the stitches. Don't use the standard automobile white paste wax as this will leave white chit all over your seat.
To seal the seams, use a spray wax like Pledge on the seat and rub it in. Problem is that this can make the seat slippery. One I've done before is to find a clear paste wax and just rub it into the stitches. Don't use the standard automobile white paste wax as this will leave white chit all over your seat.
Last edited by 95yj; 06-26-2011 at 03:49 PM.
Trending Topics
#8
#10
Thread
Thread Starter
Forum
Replies
Last Post