any idea on numbers
#1
11-02-2006 | 03:02 PM
Thread Starter
|
Tourer
Joined: Jan 2006
Posts: 307
Likes: 1
From:
any idea on numbers
i have A 01 flstc i dropped her off last week to have work done having 95" 10.25 :1 comp pistons port & polish heads 3 angle valve job bigger valves & comperssion releases installed i already have thunderheader & se 211 cams . i hope to get her back today.she should run pretty good . any thoughts or experience will be appareciated
#2
11-02-2006 | 03:16 PM
May our Moderator Rest in Peace
Joined: Sep 2006
Posts: 11,386
Likes: 29
From: Rochester, NY
#4
11-02-2006 | 09:22 PM
Road Warrior
Joined: Jan 2006
Posts: 1,879
Likes: 4
From: miami,fl
RE: any idea on numbers
Would appreciate anyinsight on how much something like that costs.Reason being i'm looking into maybe doing 95 or 98 in the future.The thing is i know nothing about these builds or what can or should be done.thanks
ORIGINAL: XfasteddieX
i have A 01 flstc i dropped her off last week to have work done having 95" 10.25 :1 comp pistons port & polish heads 3 angle valve job bigger valves & comperssion releases installed i already have thunderheader & se 211 cams . i hope to get her back today.she should run pretty good . any thoughts or experience will be appareciated
i have A 01 flstc i dropped her off last week to have work done having 95" 10.25 :1 comp pistons port & polish heads 3 angle valve job bigger valves & comperssion releases installed i already have thunderheader & se 211 cams . i hope to get her back today.she should run pretty good . any thoughts or experience will be appareciated
#5
11-03-2006 | 12:18 PM
Thread Starter
|
Tourer
Joined: Jan 2006
Posts: 307
Likes: 1
From:
rick my cost on the 95 kit install was
just under 1214.24 total out of pocket but i didnt use a dealership i used a independant shop here in denison tx . pro custom cycles . he did full port& polish on heads & intake bigger valves 3 angle valve job boared my cylenders out to 95 " installed pistons & cylenders + he did the 30,000 mile service what i paid him was 1037.24 i bought pistons new in box on ebay for 108.00 shipping included they are se 10.25:1 comp & i supplied the oil for 30 k service 5 qt of se 20-50 use it in tranny engine and primary + filter 69.00 really not to bad
#7
11-03-2006 | 02:34 PM
Road Warrior
Joined: Jan 2006
Posts: 1,879
Likes: 4
From: miami,fl
RE: rick my cost on the 95 kit install was
Sounds great.I have indy's here and plan to do something like what you did or similar after the new year.Congrtas again.
ORIGINAL: XfasteddieX
just under 1214.24 total out of pocket but i didnt use a dealership i used a independant shop here in denison tx . pro custom cycles . he did full port& polish on heads & intake bigger valves 3 angle valve job boared my cylenders out to 95 " installed pistons & cylenders + he did the 30,000 mile service what i paid him was 1037.24 i bought pistons new in box on ebay for 108.00 shipping included they are se 10.25:1 comp & i supplied the oil for 30 k service 5 qt of se 20-50 use it in tranny engine and primary + filter 69.00 really not to bad
just under 1214.24 total out of pocket but i didnt use a dealership i used a independant shop here in denison tx . pro custom cycles . he did full port& polish on heads & intake bigger valves 3 angle valve job boared my cylenders out to 95 " installed pistons & cylenders + he did the 30,000 mile service what i paid him was 1037.24 i bought pistons new in box on ebay for 108.00 shipping included they are se 10.25:1 comp & i supplied the oil for 30 k service 5 qt of se 20-50 use it in tranny engine and primary + filter 69.00 really not to bad
Thread
Thread Starter
Forum
Replies
Last Post
Tn.Heritage
Exhaust System Topics
11
02-24-2008 11:39 PM